Abstract:Deformation twinning is a phenomenon that causes local shear strain concentrations, with the material either experiencing elongation (and thus a tensile stress) or contraction (compressive stress) along the stress directions. Thus, in order to gauge the performance of the alloy better, it is imperative to predict the activation of twinning systems successfully. The present study investigates the effects of deformation by cold-rolling on the {332}<113> and {112}<111> twin variant activation in a Ti-30Nb-12Zr-5Ta-2Sn-1.25Fe (wt.%) (TNZTSF) alloy. The Ti-30Nb-12Zr-5Ta-2Sn-1.25Fe (wt.%) alloy was synthesized in a cold crucible induction levitation furnace, under an argon-controlled atmosphere, using high-purity elemental components. The TNZTSF alloy was cold-deformed by rolling, in one single step, with a total deformation degree (thickness reduction) of ε ≈ 1% (CR 1), ε ≈ 3% (CR 3), and ε ≈ 15% (CR 15). The microstructural investigations were carried out with the SEM-EBSD technique in order to determine the grain morphology, grain-size distribution, crystallographic orientation, accumulated strain-stress fields and Schmid Factor (SF) analysis, all necessary to identify the active twin variants. The EBSD data were processed using an MTEX Toolbox ver. 5.7.0 software package. The results indicated that the TNZTSF alloy’s initial microstructure consists of a homogeneous β-Ti single phase that exhibits equiaxed polyhedral grains and an average grain-size close to 71 μm. It was shown that even starting with a 1% total deformation degree, the microstructure shows the presence of the {332}<113> twinning ((233)[3¯11] active twin variant; Schmit factor SF = −0.487); at a 3% total deformation degree, one can notice the presence of primary and secondary twin variants within the same grain belonging to the same {332}<113> twinning system ((323¯)[13¯1¯] primary twin variant—SF = −0.460; (233¯)[3¯11¯] secondary twin variant—SF = −0.451), while, at a 15% total deformation degree, besides the {332}<113> twinning system, one can notice the activation of the {112}<111> twinning system ((11¯2)[1¯11] active twin variant—SF = −0.440). This study shows the {332}<113> and {112}<111> twinning variant activation during cold-deformation by rolling in the case of a Ti-30Nb-12Zr-5Ta-2Sn-1.25Fe (wt.%) (TNZTSF) alloy.

EBSD Characterization of Twinning in Cold-Rolled CP-Ti

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

In Situ Nanomechanical Testing of Twinned Metals in a Transmission Electron Microscope

In situ EBSD study of the twinning deformation behaviors in pure titanium

Texture and Twinning Evolution of Cold-Rolled Industrial Pure Zirconium

Texture evolution and twinnability prediction of the most compliant orientation in GH3536 superalloy during cold rolling

Novel deformation twinning system in a cold rolled high-strength metastable- Ti-5Al-5V-5Mo-3Cr-0.5Fe alloy

Transmission electron microscopy observation of a deformation twin in TWIP steel by an ex situ tensile test

{332}<113> and {112}<111> Twin Variant Activation during Cold-Rolling of a Ti-Nb-Zr-Ta-Sn-Fe Alloy

The Role of Nano-Scaled Structural Non-Uniformities on Deformation Twinning and Stress-Induced Transformation in a Cold Rolled Multifunctional Β-Titanium Alloy

Influence of Initial Textures on Microstructure and Mechanical Properties of Commercially Pure TA2 Titanium Sheet Pre-Strained by Cryorolling

EBSD Analysis and Theoretical Prediction of Twin Orientations During Compression in Mg-3Al-1Zn

Twinning Behavior of a Strongly Basal Textured AZ31 Mg Alloy During Warm Rolling

Multi-scale characterization of deformation features and precipitation behavior in a near β-Ti alloy

The tensile properties and microstructure evolution of cold-rolled Fe–Mn–C TWIP steels with different carbon contents

Fabrication of dual-gradient microstructure and their effects on the mechanical properties of commercial pure Ti

Three-dimensional study of grain scale tensile twinning activity in Mg: A combination of microstructure characterization and mechanical modeling

Quantitative investigation on the {10–12} twinning-detwinning behavior and twinning transfer of an extruded Mg-2.8Y sheet during compression-tension loading via quasi-in-situ EBSD observation

Quantitative study of microstructural, textural and hardness evolution of high-purity Ti sheet during rolling from low to medium strains

Effect of Local Stresses of Primary Twinning on Double Twinning, Twin Intersection and Their Competition

Microstructure and Mechanical Properties of Asymmetrically Rolled High-Purity Titanium Ultra-Thin Strips