Abstract:Abstract Background The aim of the study is to characterize a biomedical magnesium alloy and highlighting the loss of mechanical integrity due to the sterilization method. Ideally, when using these alloys is to delay the onset of degradation so that the implant can support body loads and avoid toxicological effects due to the release of metal ions into the body. Methods Standardized procedures according to ASTM F-1264 and ISO-10993-5 were used, respecting detailed methodological controls to ensure accuracy and reproducibility of the results, this testing methodology is carried out in accordance with the monographs of the Pharmacopoeia for the approval of medical devices and obtaining a health registration. An intramedullary implant (IIM) manufactured in magnesium (Mg) WE43 can support loads of the body in the initial period of bone consolidation without compromising the integrity of the fractured area. A system with these characteristics would improve morbidity and health costs by avoiding secondary surgical interventions. Results As a property, the fatigue resistance of Mg in aggressive environments such as the body environment undergoes progressive degradation, however, the autoclave sterilization method drastically affects fatigue resistance, as demonstrated in tests carried out under in vitro conditions. Coupled with this phenomenon, the relatively poor biocompatibility of Mg WE43 alloys has limited applications where they can be used due to low acceptance rates from agencies such as the FDA. However, Mg alloy with elements such as yttrium and rare earth elements (REEs) have been shown to delay biodegradation depending on the method of sterilization and the physiological solution used. With different sterilization techniques, it may be possible to keep toxicological effects to a minimum while still ensuring a balance between the integrity of fractured bone and implant degradation time. Therefore, the evaluation of fatigue resistance of WE43 specimens sterilized and tested in immersion conditions (enriched Hank’s solution) and according to ASTM F-1264, along with the morphological, crystallinity, and biocompatibility characterization of the WE43 alloy allows for a comprehensive evaluation of the mechanical and biological properties of WE43. Conclusions These results will support decision-making to generate a change in the current perspective of biomaterials utilized in medical devices (MDs), to be considered by manufacturers and health regulatory agencies. An implant manufactured in WE43 alloy can be used as an intramedullary implant, considering keeping elements such as yttrium-REEs below as specified in its designation and with the help of a coating that allows increasing the life of the implant in vivo.

Effect of Sterilization Process on Surface Characteristics and Biocompatibility of Pure Mg and MgCa Alloys

Comparing Medium Pressure Dielectric Barrier Discharge (DBD) Plasmas and Classic Methods of Surface Cleaning/activation of Pure Mg for Biomedical Applications

Impact of sterilization treatments on biodegradability and cytocompatibility of zinc-based implant materials

Biocompatibility of Surface Modified Magnesium by Heat-Self-assembled Monolayer

Influence of Different Sterilization Methods on the Surface Chemistry and Electrochemical Behavior of Biomedical Alloys

In Vitro Degradation and Biocompatibility of Mg-Li-Ca Alloys—the Influence of Li Content

A Study on Alkaline Heat Treated Mg-Ca Alloy for the Control of the Biocorrosion Rate.

Effect of sterilization on 3-point dynamic response to in vitro bending of an Mg implant

Influence of sterilization on physiochemical features of poly(amino acids)/calcium sulfate composite

Corrosion Resistance and Surface Biocompatibility of a Microarc Oxidation Coating on a Mg–Ca Alloy

Effect of Mg 2+ concentration on biocompatibility of pure magnesium

In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy

Corrosion Resistance and Cytotoxicity of a MgF2 Coating on Biomedical Mg–1Ca Alloy Via Vacuum Evaporation Deposition Method

Degradation Behavior and Mechanical Integrity of a Mg-0.7Zn-0.6Ca (wt.%) Alloy: Effect of Grain Sizes and Crystallographic Texture

Influences of Extrusion and Silver Content on the Degradation of Mg-Ag Alloys in Vitro and in Vivo.

Biocompatibility Enhancement Of Rare Earth Magnesium Alloy By Laser Surface Processing

Adverse effects of sterilization processes on the fundamental topographic properties of modified dental implant surfaces

Influence of Biocompatible Metal Ions (ag, Fe, Y) on the Surface Chemistry, Corrosion Behavior and Cytocompatibility of Mg-1ca Alloy Treated with Mevva

Mechanical properties and corrosion behavior of Mg-Gd-Ca-Zr alloys for medical applications

Effects of Extrusion on Mechanical and Corrosion Resistance Properties of Biomedical Mg-Zn-Nd-xCa Alloys

Effect of Surface Mechanical Attrition Treatment on Biodegradable Mg-1Ca Alloy.