Parameter Sensitivity Analysis of In-Wheel Motor Drive System with Rubber Bushings

Di Tan,Yu-tao Luo,Zhi-wei Ye

DOI: https://doi.org/10.3969/j.issn.1000-565X.2013.05.021

2013-01-01

Abstract:In an electric vehicle driven by in-wheel motor, the motor, the wheels and the brake are all embedded in the wheels. This configuration not only increases the unsprung mass but also results in critical vibration of the in-wheel motor system due to the nonuniform motor air-gap caused by road excitation. In order to solve these pro-blems, based on the novel in-wheel motor topology scheme put forward in their early work, the authors set up a novel vehicle vibration model and derive the frequency response functions of the vehicle riding comfort indexes which fit varied road unevenness, such as the multi-mass system body acceleration, the relative dynamic tyre load, the dynamic suspension deflection and the relative displacement between the rotor center and the stator center. Finally, the sensitivity analyses of some important structural parameters, such as the total mass of in-wheel motor, the mass ratio of the stator to the rotor, the bearing stiffness, the rubber bushing stiffness, are carried out to reveal the effects of the parameters on the vehicle riding comfort indexes. The results show that the rubber bushing damping is the greatest influence factor of the body acceleration and the suspension working space, with the corresponding sensitivities being up to 10.33 and 10.21, respectively; that the bearing stiffness is the most sensitive factor of the relative displacement between the rotor center and the stator center, with the corresponding sensitivity being up to 12.07; that the total mass of in-wheel motor is the most sensitive factor of the dynamic tyre load, with the sensitivity being up to 10.49; and that, among all the above-mentioned parameters, the stator-to-rotor mass ratio has the slightest effect on the vibration response indexes.