Abstract:A rotor system supported by active magnetic bearings (AMBs) is actually a second-order dynamical system, whose dynamical characteristics should be considered in the design process of the controller. The relationships between the dynamical parameters and the control parameters can be established by the eigenstructure assignment. Output feedback dynamical compensators (OFDCs) are proposed based on the eigenstructure assignment for an AMBs-rigid rotor system in this article. First, the model of the four-degree-of-freedom AMBs-rigid rotor system was established, and it was decoupled into two single-degree-of-freedom (S-DOF) translational sub-systems and two S-DOF rotational sub- systems through the modal decoupling method. Aiming to the control of the four S-DOF systems, the relationships among the parameters of the OFDCs, the eigenvalues, and the eigenvectors were derived based on the eigenstructure assignment. Then, a multiobjective optimization problem was constructed in which the system stability, the robustness to the bias current perturbation, and the maximum amplitudes of the unbalance displacement and control current were considered. Several Pareto solutions were obtained through NSGA-II, and different solutions were selected to compare the performance of the corresponding systems. The simulation and experimental results verify the effectiveness of the proposed OFDCs and the rationality of the proposed design process.

Fuzzy Proportional-Integral-Derivative Control of an Overhang Rotor with Double Discs Based on the Active Tilting Pad Journal Bearing

Control Strategy for an Unsymmetrical Rotor System with an Active Tilting Pad Journal Bearing

H-infinity Robust Control of the Suspension System for a Bearingless Motor of Permanent Magnet Type

Vibration of Flexible Rotor Systems with Two-Degree-Of-Freedom Pid Controller of Active Magnetic Bearings

Rotor Vibration Control for Magnetic Suspended High-Speed Flywheel Energy Storage System with Inverse System Method and Extended 2-DOF PID Controller

Robust Proportional-Differential Control Via Eigenstructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems

Two-Degree-of-Freedom Control for Active Magnetic Bearing Flywheel Rotor System Based on Inverse System Decoupling

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Feedforward Decoupling Control for Rigid Rotor System of Active Magnetically Suspended High‐speed Motors

Active control with multi-frequency transmission force of multi-span rotor system

Dynamical Behaviors of Hybrid Squeeze Film Damper for Rotor System Vibration Control

Multi-Objective Optimal Design of Μ–controller for Active Magnetic Bearing in High-Speed Motor

Active Control of Unbalance Response of Rotor Systems Supported by Tilting-Pad Gas Bearings

Multi-objective Optimization of Active Dry Friction Damper-Rotor Systems Based on Predictive Control

Output Feedback Dynamical Compensation Via EigenStructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems.

The Effect of Controllers on the Dynamic Behaviour of a Rotor Supported on Active Magnetic Bearings

Dynamics Analysis Control on Dual Delay Bearing-Rotor System

Improvement of Rotor Performance under Rubbing Conditions Through Active Auxiliary Bearings

Radial position control for magnetically suspended high‐speed flywheel energy storage system with inverse system method and extended 2‐DOF PID controller

A novel transient computational fluid dynamics-fluid–structure interaction model for the pad adaptive motion and rotordynamic coefficients of hybrid porous tilting pad bearings

Dynamic Analysis on Rotor System Supported by Active Electromagnetic Bearings