Calibration of CCD Temperature Measurement System Based on RGB Digital Filtering in Laser Cladding

黄洁,张轲,朱晓鹏,涂志强

DOI: https://doi.org/10.16136/j.joel.2013.05.008

2013-01-01

Abstract:To improve the precision and temperature range of the laser cladding temperature measurement system based on CCD colorimetric thermometry,a new method is proposed to perform temperature calibration by using RGB digital filtering.Take the temperature radiation image of the MIKON M390 high temperature standard blackbody furnace in each 50 ℃ under different parameters.Then calibrate the color-CCD from 1 000 ℃ to 1 800 ℃ by colorimetric thermometry.Emissivity is firstly included in the undetermined coefficient K and then the correspondence function relation between parameter K and gray ratio is built by least square method to reduce the error caused by emissivity.The idea of equipping with RGB narrowband filters is put forward to do image acquisition and color filtering processing,and then the mapping relationship between theRGB filter′s gray level and no color filter′s gray level is established,which can realize digital filtering of the no RGB filter′s gray level,to achieve the error correction of spectral bandwidth response.Through this method,the maximum temperature error is deeply reduced to 38.6 ℃ in measuring range,and the temperature measuring range is enlarged by about 300 ℃.The experiment results show that the method,which is based on RGB digital filtering to realize the calibration of color-CCD,is quite simple,practical,but high accuracy,and can largely improve the temperature range.