Abstract:Three-dimensional numerical simulations are performed on air-breathing rotating detonation combustors with detailed H2/air chemistry. Detonation-related flow structures and pressure gain performance have been investigated. Emphasis is placed on the effects of the upstream oblique shock wave that is attached with detonation. This unsteady oblique shock wave is found to rotate along the chamber in the pre-detonation region. The angle of the upstream oblique shock wave shows a negative correlation with chamber pressure. Moreover, particle trajectory analysis shows that particles cross the unsteady upstream oblique shock wave twice or three times before being consumed by detonation, with obvious deflections in the radial direction due to the curvature effect, while particles collide with the downstream oblique shock wave in the post-detonation region once. At the exit, more than 96% of kinetic energy is still concentrated in the axial direction. Furthermore, the pressure gain performance is investigated by the integral of total pressure over the averaged area in the axial direction and individual particles. The results show that detonation-related flow structures in the current chamber configuration fail to achieve positive pressure gain. −17.2%, −16.4%, and −17.8% of total pressure gain are obtained in three numerical simulations. Further analysis shows that though the total pressure of particles increases instantly when encountering the upstream oblique shock wave, 25% of total pressure is lost before detonation combustion due to the large angle of the upstream oblique shock wave and the geometry. The cumulative effect of the pre-detonation region on the total pressure is equivalent to flows with Mach 1.94 crossing a normal shock wave.

Numerical Investigation of Backpropagation of Air-Breathing Pulse Detonation Engine

Back-propagation suppression study based on intake configuration optimization for an air-breathing pulse detonation engine

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

Numerical Investigation on New Engine Combustion Charactristic of Helicopter

Numerical Investigation of Contact Burning in an Air-Breathing Continuous Rotating Detonation Engine

Numerical simulations and theoretical analysis of the forward shock wave in a non-premixed air-breathing rotating detonation combustor

Numerical Study on Detonation Initiation Process in a Reverse Ignition Boosted Detonation Chamber

Two-dimensional Numerical Simulation for Ignition of Pulse Detonation Engine

Numerical investigation of flame propagation and performance of obstructed pulse detonation engine with variation of hydrogen and air

Numerical Research on the Propagation Characteristics and Evolution Mechanisms of Rotating Detonation Waves with the Spatial Fluctuation of Inlet Total Pressure

Numerical Study of the Reverse-Rotating Waves in Rotating Detonation Engine with a Hollow Combustor

Investigation of the evolution process and propulsion performance of the longitudinal pulsed detonation in rotating detonation combustors

Numerical Investigation of the Pressure Gain Obtained by the Double-Stage JP-10/air Detonation Wave

Numerical Investigation of the Instability of Continuous Detonation Engine

Flow-field Analysis and Pressure Gain Estimation of a Rotating Detonation Engine with Banded Distribution of Reactants

Analysis of flow-field characteristics and pressure gain in air-breathing rotating detonation combustor

Tip to End Analysis of Air Breathing Rotating Detonation Engine System

Numerical study of the mechanisms of the longitudinal pulsed detonation in two-dimensional rotating detonation combustors

Numerical investigation of detonation initiation in a modeled rotating detonation engine

Influence of Aerodynamic Valve Structural Parameters on Detonation initiation and Back Pressure Characteristics of Air-Breathing Pulse Detonation Engine

Numerical research on kerosene/hydrogen/air rotating detonation engines with discrete injection strategies