Abstract:The emissions of volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) from indoor building and vehicle cabin materials can adversely affect human health. Many mechanistic models to predict the VOC/SVOC emission characteristics have been proposed. Nowadays, the main obstacle to accurate model prediction is the availability and reliability of the physical parameters used in the model, such as the initial emittable concentration, the diffusion coefficient, the partition coefficient, and the gas-phase SVOC concentration adjacent to the material surface. The purpose of this work is to review the existing methods for measuring the key parameters of VOCs/SVOCs from materials in both indoor and vehicular environments. The pros and cons of these methods are analyzed, and the available datasets found in the literature are summarized. Some methods can determine one single key parameter, while other methods can determine two or three key parameters simultaneously. The impacts of multiple factors (temperature, relative humidity, loading ratio, and air change rate) on VOC/SVOC emission behaviors are discussed. The existing measurement methods span very large spatial and time scales: the spatial scale varies from micro to macro dimensions; and the time scale in chamber tests varies from several hours to one month for VOCs, and may even span years for SVOCs. Based on the key parameters, a pre-assessment approach for indoor and vehicular air quality is introduced in this review. The approach uses the key parameters for different material combinations to pre-assess the VOC/SVOC concentrations or human exposure levels during the design stage of buildings or vehicles, which can assist designers to select appropriate materials and achieve effective source control.

Measuring the Characteristic Parameters of VOC Emission from Paints

Measuring key emission parameters of VOC from materials based on concentration trajectory in ventilated chamber

A Fast and Accurate Airtight Chamber Method for Determining the Characteristic Parameters of VOC Emission from Building Materials

A physically-based model for prediction of VOCs emissions from paint applied to an absorptive substrate

A Rapid and Accurate Method, Ventilated Chamber C-history Method, of Measuring the Emission Characteristic Parameters of Formaldehyde/vocs in Building Materials

A new method of measuring VOC emission characteristics of dry building materials

Mathematical model for characterizing the full process of volatile organic compound emissions from paint film coating on porous substrates

A multisource mass transfer model for simulating VOC emissions from paints

Characterizing the emission behaviors of cumulative VOCs from automotive solvent-based paint sludge

A General Regression Method for Accurately Determining the Key Parameters of VOC Emissions from Building Materials/furniture in a Ventilated Chamber

Measurement Methods and Impact Factors for the Key Parameters of VOC/SVOC Emissions from Materials in Indoor and Vehicular Environments: A Review

Alternately Airtight/ventilated Emission Method: A Universal Experimental Method for Determining the VOC Emission Characteristic Parameters of Building Materials

[Estimation and Forecast of Volatile Organic Compounds Emitted from Paint Uses in China].

Improved C-history Method for Rapidly and Accurately Measuring the Characteristic Parameters of Formaldehyde/vocs Emitted from Building Materials

New method for determining VOC emission parameters for dry building materials

Comprehensive understanding the emission characteristics and kinetics of VOCs from automotive waste paint sludge in a environmental test chamber

Applying C-history method to measure the VOC emission parameters of building material and furniture: Tests and validation

A new method, c-history based sink effect method, of determining key physical properties of VOC emission from dry building materials

Predicting VOC Emissions from Materials in Vehicle Cabins: Determination of the Key Parameters and the Influence of Environmental Factors

Characteristics of Volatile Organic Compounds (vocs) Emission from Electronic Products Processing and Manufacturing Factory

Mass transfer of volatile organic compounds from painting material in a standard field and laboratory emission cell