Abstract:Even though reflection layer is quite commonly used in Lead-frame packaging structures for Low Power or Mid Power LEDs and COB structures, it can't be used for silicon-based packaging structures with cavity and TSVs for High Power LEDs. Since it is difficult to perform a TSV redistribution layer patterning in the cavity via photolithography technologies, fabricating a reflection layer on top of the cavity is impossible by traditional way. In this situation, a simple method using a conventional dispensing coating method is proposed to obtain a local coverage of photoresist coating in a Si cavity. An effective reflection layer can be achieved by photoresist coating, metal film deposition and Lift-off process. The influence of the reflective layer on Correlated Color Temperature (CCT) and Angular Color Uniformity of LEDs with conformal phosphor has been investigated numerically and experimentally. Using the same amount of phosphor, a structure with an Ag-coated reflective layer provides a lower CCT and a more uniform color distribution. This demonstrates that the application of a reflective layer can save phosphor consumption. The experimental data agrees well with the simulation results. The cavity size will also influence the color temperature and angular color uniformity. The simulation results indicate that CCT will be decreased and angular color uniformity will be improved when the cavity size is decreased. The reason is that the small size cavity fits well with the requirement of conformal coating, which is the thickness uniformity of the phosphor layer. The phosphor layer above chip is just 100 mu m. That means, in order to get a conformal coating, the cavity size should be almost as small as the chip size. However the luminous efficiency will decrease when reducing the cavity length, due to the cavity side wall reflection influence. A cavity length of 3mm will be the optimized choice when balancing the luminous efficiency and angular color uniformity.

Detailed Study on Pulse-Sprayed Conformal Phosphor Configurations for LEDs

Conformal Phosphor Coating for Phosphor-Converted White LEDs on Basis of Dispensing Process

Effect of Phosphor Composition and Packaging Structure of Flexible Phosphor Films on Performance of White LEDs

Conformal Phosphor Coating Using Capillary Microchannel for Controlling Color Deviation of Phosphor-Converted White Light-Emitting Diodes.

Optimized Self-Adaptive Phosphor Coating Structure of White LEDs by Conventional Dispensing Method

Investigation Of The Influence Of Ag Reflective Layer On The Correlated Color Temperature And The Angular Color Uniformity Of Led With Conformal Phosphor Coating

Studies on Optical Consistency of White LEDs Affected by Phosphor Thickness and Concentration Using Optical Simulation

Cymbal-shaped phosphor structure for phosphor-converted white LEDs

Conformal Phosphor Distribution for White Lighting Emitting Diode Packaging by Conventional Dispensing Coating Method with Structure Control

Effects of phosphor’s thickness and concentration on performance of white LEDs

Dip-transfer Phosphor Coating on Designed Substrate Structure for High Angular Color Uniformity of White Light Emitting Diodes with Conventional Chips

Study on the Optical Properties of Conformal Coating Light-Emitting Diode by Monte Carlo Simulation

Effects of Phosphor’s Location on LED Packaging Performance

Effect of particle sizes and mass ratios of a phosphor on light color performance of a green phosphor thin film and a laminated white light-emitting diode

Enhancing Angular Color Uniformity of Phosphor-Converted White Light-Emitting Diodes by Phosphor Dip-Transfer Coating

Composition and structure design of three-layered composite phosphors for high color rendering chip-on-board light-emitting diode devices

Excellent color quality of phosphor converted white light emitting diodes with remote phosphor geometry

Dynamic Phosphor Sedimentation Effect on the Optical Performance of White LEDs

Realization of high spatial color uniformity for white light-emitting diodes by remote hemispherical YAG: Ce phosphor film

Improvement of Emission Efficiency and Color Rendering of High-Power LED by Controlling Size of Phosphor Particles and Utilization of Different Phosphors.

Color Converter Based on Transparent Ce:YAG Ceramic by Different Package Structure for High-Power White LED