Abstract:This paper discusses the pulse signal of a highly sensitive lateral deformable optical microelectromechanical systems (MEMS) displacement sensor based on Wood's anomalies and its corresponding tolerance. The optical reflection amplitude of the device changes with the displacement of the nanostructured grating elements. Unexpectedly, the device's original sinusoidal signal develops into a new signal form (i.e., a pulse signal), when the air gap between the two layers of gratings decreases. Since the slope of the pulse signal, namely 2.5%/nm (i.e., 0.65 dB/nm), is eight times higher than that of the original signal form, namely 0.3%/ nm (i.e., 0.03 dB/nm), the sensitivity of the structure improves by eight times. However, this device is very sensitive to parameters such as its wavelength, period, duty ratio, and air gap. In this paper we used rigorous coupled wavelength analysis (RCWA) to analyze and optimize the respective influence of each parameter on the device's performance. We have introduced two methods to search for the optimal setting and have demonstrated the optimal settings of different incident lights. The simulation results indicate that it is close to 85% possible to achieve an actual device with the highest slope superior to 0.5%/nm and it is 64% possible that the highest slope of an actual device falls in the interval ranging from 1.0%/nm to 2.0%/nm. All the simulated data helped us better understand the tolerance of the pulse signal and guide us toward the development of an actual device. (C) 2015 Optical Society of America

MEMS Based Micro Displacement Sensor and Its Application

Nano-Displacement Measurement Based On Virtual Pinhole Confocal Method

Nanometer-scale Displacement Sensor Based on Phase-Sensitive Diffraction Grating.

Subnanometer Resolution Displacement Sensor Based on a Grating Interferometric Cavity with Intensity Compensation and Phase Modulation

Highly Sensitive Lateral Deformable Optical MEMS Displacement Sensor: Anomalous Diffraction Studied by Rigorous Coupled-Wave Analysis.

High-precision micro-displacement sensor based on tunnel magneto-resistance effect

A High-Resolution Displacement Sensor Based on a Grating Interferometer with the Phase Modulation Technique

Micro-Opto-Electro-Mechanical Systems for High-Precision Displacement Sensing: A Review

Micrograting Displacement Sensor with Integrated Electrostatic Actuation

An ultracompact high-resolution displacement sensor based on self-interference effect of single optical nanograting

High-precision Microdisplacement Sensor Based on Zeroth-Order Diffraction Using a Single-Layer Optical Grating.

Integrated High Sensitivity Displacement Sensor Based on Micro Ring Resonator

Vernier Effect-Based Displacement Sensor Using In-Fiber Hollow Microsphere with a Hole

Self-Sensing Electromechanical System Integrated with the Embedded Displacement Sensor

Noncontact Subnanometer Resolution Displacement Sensing With Wide Bandwidth Based on Squeeze Film Damping Effect

Micro displacement sensor based on line-defect resonant cavity in photonic crystal.

A Novel Coplanar Capacitive Micro-Displacement Sensor Combining Microfluidic Channels for Bridge Health Monitoring

A nanoelectromechanical position-sensitive detector with picometer resolution

Design of GMR-based Contactless Displacement Detecting System with Long Dynamic Range

Probe-Type Microforce Sensor for Mirco/Nano Experimental Mechanics

A Novel Micro-Displacement Sensor Based on Double Optical Fiber Probes Made through Photopolymer Materials