Abstract:An efficient intersection signal scheme is of vital significance to urban traffic operation. At present, multiperiod fixed-timing control is still the traffic signal control method adopted by many urban intersections. For the optimization problem of signal scheme selection at signalized intersections, we proposed three two-step prediction optimization methods that match the traffic arrival in different periods with the corresponding optimal signal scheme, aimed at reducing the total delay of vehicles at signalized intersections. The first method predicts the traffic flow in each entrance direction of the intersection by minimizing the mean square error (MSE), then obtains the total vehicle delay of each scheme in the signal scheme set through the Highway Capacity Manual 2010 delay formula, and finally substitutes it into the signal optimization model to obtain the optimal scheme combination. The second method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing the MSE and then substitutes it into the signal optimization model to obtain the optimal scheme combination. The third method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing both the MSE and the prediction error between every two schemes and then substitutes it into the signal optimization model to obtain the optimal scheme combination. Verification based on actual intersection shows that better optimization results can be obtained by integrating optimization objectives into the prediction process. Besides, some practical insights can be drawn through applicability analysis and sensitivity analysis. First, the proposed model is more suitable for intersections where traffic arrivals vary greatly. Second, with the increase of scheme differences within a certain range, the advantages of the proposed method become more obvious. Finally, it is necessary to balance the flexibility of traffic control with control effectiveness in practical applications.

Bus Signal Priority Control Method for Isolated Intersection Based on Dynamic Variable Speed Adjustment

Bus Priority Signal Control for Signalized Intersection without Bus Lane

Conditional Active and Passive Bus Signal Priority Strategies Considering Saturation Degree Restriction at an Isolated Junction

Bus signal priority method at arterial signal progression

Multi-phase bus signal priority strategy at isolated intersections

Development and Evaluation of a Passive Bus Signal Priority Algorithm at Isolated Intersection

Proactive Coordination of Traffic Guidance and Signal Control for a Divergent Network

Multiple-Phase Bus Signal Priority Strategy for Arterial Coordination Intersection

Optimal control to improve reliability of demand responsive transport priority at signalized intersections considering the stochastic process

An Approach of Transit Passive Priority with Transit Phase Overlapped at Intersection of Arterial Signal Progression

Multi-agent Fuzzy Signal Control with Bus Priority

Signal Timing Optimization Model Based on Bus Priority.

Dynamic headway control for high‐frequency bus line based on speed guidance and intersection signal adjustment

Designing Sustainable Public Transportation: Integrated Optimization of Bus Speed and Holding Time in A Connected Vehicle Environment

Adaptive Control of Isolated Intersections Based on Sequential Signal-Stage Optimisation

Study of Vehicle Delay Calculation and Optimal Signal-planning Method for Intersections with Induced Signal Based on Bus Priority

Simulation analysis of traffic signal control and transit signal priority strategies under Arterial Coordination Conditions

Optimization Method Based on Emission Factors of Signal Control for Bus Priority

Optimal signal-planning method of intersections based on bus priority

Collaborative optimization of intersection signals and speed guidance for buses run on overlapping route segments under connected environment

A Semi-"Smart Predict, then Optimize" Method for Traffic Signal Control.