Abstract:RE-Ba-Cu-O (RE denotes rare earth elements) single-grain superconductors have garnered considerable attention owning to their ability to trap strong magnetic field and self-stability for maglev. Here, we employed a modified melt-growth method by adding liquid source (LS) to provide a liquid rich environment during crystal growth. It further enables a significantly low maximum processing temperature (Tmax) even approaching peritectic decomposition temperature. This method was referred as the liquid source rich low Tmax (LS+LTmax) growth method which combines the advantage of Top Seeded Infiltration Growth (TSIG) into Top Seeded Melt-texture Growth (TSMG). The LS+LTmax method synergistically regulates the perfect appearance and high superconducting performance in REBCO single grains. The complementary role of liquid source and low Tmax on the crystallization has been carefully investigated. Microstructure analysis demonstrates that the LS+LTmax processed GdBCO single grains show clear advantages of uniform distribution of RE3+ ions as well as RE211 particles. The inhibition of Gd211 coarsening leads to improved pining properties. GdBCO single-grain superconductors with diameter of 18 mm and 25 mm show maximum trapped magnetic field of 0.746 T and 1.140 T at 77 K. These trapped fields are significantly higher than those of conventional TSMG samples. Particularly, at grain boundaries with reduced RE211 density superior flux pinning performance has been observed. It indicates the existence of multiple pinning mechanisms at these areas. The presented strategy provides essential LS+LTmax technology for processing high performance single-grain superconductors with improved reliability which is considered important for engineering applications.

Infiltration Growth of Mg-doped Nd–Ba–Cu–O Seed Crystals for the Fabrication of Large Grain RE–Ba–Cu–O Bulk Superconductors

Multi-seeded growth of melt processed Gd–Ba–Cu–O bulk superconductors using different arrangements of thin film seeds

Growth of single-grain GdBa<sub>2</sub>Cu<sub>3</sub>O<sub>7-x</sub>superconductors by top seeded infiltration and growth technique

Fabrication of Single-Grain GdBa 2 Cu 3 O 7− X Bulk Superconductors with a New Kind of Liquid Source by the Top Seeded Infiltration and Growth Technique

Growth and Superconductivity of REBCO Bulk Processed by a Seed/buffer Layer/precursor Construction

Fabrication of Large Gd–Ba–Cu–O Single Domains with Different Liquid Sources

Melt-textured Growth of NdBCO Bulk Seeded by Superheating NdBCO Thin Film

A practical processing method for fabrication of single-domain YBCO superconductors using large-sized GdBCO seed crystals

Study on the NdBCO LPE Thick Film Seed for the Melt-Textured Growth of YBCO and (Y,sm)bco

YBCO-buffered NdBCO film with higher thermal stability in seeding REBCO Growth

Large Size and High Performance of a Gd–Ba–Cu–O Bulk Superconductor Grown Using New Approaches

Study on the Thermal Stability of the NdBCO Film in Inducing the Growth of REBa2Cu3Ox/Ag Superconductor Bulks

YBCO Melt-Textured Growth Seeded by NdBCO Liquid Phase Epitaxy Thick Film

Growth of Ca‐Doped Large Grain Gd–Ba–Cu–O Superconductors

Melt-textured Growth of (lre)–ba–cu–o by a Cold-Seeding Method Using SmBa2Cu3Oythin Film As a Seed

Improvements of Liquid Source for Infiltration and Growth of GdBa2Cu3O7−x Superconducting Single Grains

Synthesis and Characterization of Large Single-Domain Gd–Ba–Cu–O Bulk Superconductor Material Using a Modified IG Process

Essential role of liquid phase on melt-processed GdBCO single-grain superconductors

Progress in Buffer-Supported Seeding Architectures for Reliable Epitaxial Growth of REBa2Cu3O7−δ Bulk Cryomagnets with Superior Properties

Effect of Cooling Time on the Morphology and Levitation Force of Single‐Domain Gd–Ba–Cu–O Bulk Superconductors by the Infiltration and Growth Technique

YBCO-Buffered NdBCO Film with Higher Thermal Stability in Seeding REBCO Growth and Recycling Failed Bulk YBCO Superconductors