Abstract:Comprehension of the tribological behavior of magnetorheological fluid (MRF) is crucial in many fields, particularly those related to seal wear. The sealing conditions are more complex than traditional media due to composition and rheological characteristics of MRF. The sealing pairs are prone to wear failure when in contact with magnetic particles. To this end, the paper focuses on the influence of surface roughness on MRF tribological properties with and without magnetic field. The whole experiment is carried out by a self-developed device to reproduce the wear evolution between the sealing pairs for magnetorheological damper (MRD). Experimental results show that higher surface roughness exhibits lower friction coefficient and better friction performance under MRF, especially in the absence of magnetic field. This is in stark contrast to the best wear resistance exhibited by polished samples under MSO (Methyl Silicone Oil, a carrier fluid of MRF). This means that the effective coupling between surface roughness and iron particles helps to improve the friction and wear performance of sealing pairs. On this basis, the optimum surface roughness values of metal pin under MRF are obtained. Subsequently, the effect of pin surface morphology on the dynamics of iron particles are confirmed through the analysis of scanning electron microscopy (SEM) images. It is further demonstrated that wear mechanism varies with surface roughness, that is, as the roughness increases, from sliding to mixing, and finally to rolling. Consequently, this research is of great significance for improving the wear resistance of sealing pairs under MRF.

Influence of wall texture on slip effect of magnetorheological fluids

Study on the Influence of Surface Roughness on Wall Slip Effect (in Rheological Measurement) of Magnetic Fluid

Effect of surface texture on frictional energy dissipation under magnetic fluid lubrication used for semi-active nonlinear energy sink

Influence of Friction on Magnetorheological Effect

Effects of wall slip on the dynamic characteristics of water-lubricated bearing considering rough contact

Testing study on wall-slip deduction of lubricating grease rheological property

Effect of Base Oil Lubrication Properties on Magnetorheological Fluids

The effect of groove-textured surface on friction and wear and friction-induced vibration and noise

Effect of Surface Roughness on the Stick-slip Behavior of Magnetic Field Controlled-dipolar Suspensions in Simple Linear Shear Mode

Effect of surface texture on the frictional properties of grease lubricated spherical plain bearings under reciprocating swing conditions

Influence of Groove Surface Texture on Temperature Rise under Dry Sliding Friction

Influence of magnetic property of test plates on magneto-rheological behavior

Effects of grooved surface texture on friction noise

Influence of Interparticle Friction on the Magneto-Rheological Effect for Magnetic Fluid: a Simulation Investigation

Effect of surface texture and working gap on the braking performance of the magnetorheological fluid brake

Theoretical Analyses and Experimental Research on Micro-Nano Composite Magnetorheological Grease for Sealing Liquids with Different Viscosities

Research on Internal Flow Field Characteristics of Straight-Groove Texture Using Three-Dimensional Modeling

A Novel Surface Texture Shape for Directional Friction Control

Experimental investigation of the effect of typical surface texture patterns on mechanical seal performance

Effect of Additives on Tribological Performance of Magnetorheological Fluids

Experimental study of surface roughness on improving the tribological performance of sealing pairs in magnetorheological damper