Abstract:Featured ApplicationThe corrected adaptive balancing approach considering air gap unbalance can mainly be used for the precision motorized spindle of high-end machine tools.Abstract Motorized spindles widely used for high-speed precision machine tools are very sensitive to the mass unbalance of rotors; thus, their balancing problem is always a research hotspot. Although many significant studies were done regarding the theory and application of various rotor balancing technologies for motorized spindles, the particularity of motorized spindles is not carefully considered in the existing balancing approaches. When the rotor unbalance of a motorized spindle occurs in operation, it is subject to both the mass unbalance-induced inertia force and air gap unbalance-induced electromagnetic force, which is an important feature that distinguishes the motorized spindle from a mechanical spindle. This paper describes an investigation into the corrected adaptive balancing approach of a motorized spindle by newly introducing a coefficient representing the removing effect of the air gap unbalance of the motor on the balancing capacity into the balancing formula. The determination of the newly defined coefficient refers to the calculation of electromagnetic force caused by the dynamic air gap eccentricity of motor; thus, much attention is paid to the analytical derivation of the unbalanced magnetic pull (UMP). Finally, a motorized spindle with an electromagnetic ring balancer was developed; then, the balancing tests and vibration signal analysis were done to validate the effectiveness of the newly proposed balancing approach in residual vibration reduction. It can be seen from the test results under different cases that the proposed balancing approach is effective.

Design and Performance Analysis of Hydrojet-Typed Balancing Device for High-Speed Machine Tool Spindle

Study of online balancing control technique for high-speed spindles

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

The Design Study of Single Plane Vertical Hard Bearing Dynamic Balancing Machine

Design and Implementation of Automatic Balancing Machine for Pump Impeller

Dynamic modeling and vibration response analysis of high speed motorized spindle

A New Method for Field Dynamic Balancing of Rigid Motorized Spindles Based on Real-Time Position Data of CNC Machine Tools

Model-Based Balancing Method for High-Speed Machine Tool Spindle Without Trial Weights

An Online Automatic Balancing System to Actively Reduce Vibration of Machine Tool Motorized Spindle

Development and Experimental Study of the Online Dynamic Balance System for Grinding Machine

Structural design and performance analysis of a liquid-transfer active balancing device with pneumatic means for grinding machines

A Corrected Adaptive Balancing Approach Of Motorized Spindle Considering Air Gap Unbalance

New Active Online Balancing Method for Grinding Wheel Using Liquid Injection and Free Dripping

An Online Active Balancing Method Using Magnetorheological Effect of Magnetic Fluid

New Machine Tool Motorized Spindle Integrated with One Electromagnetic Ring Balancer Driven by Optimal Square Wave

A High Accuracy Method for the Field Dynamic Balancing of Rigid Spindles in the Ultra-Precision Turning Machine

Program design of an online dynamic balancing system for grinding-wheel and spindle

Application of Precise Target Method on Dynamic Balance of Machine Tool Spindle

Novel Liquid Transfer Active Balancing System For Hollow Rotors Of High-Speed Rotating Machinery

Liquid Injection and Drainage Online Dynamic Balancing Technique for Grinding Wheel

Performance Analysis and Experimental Research of Electromagnetic-Ring Active Balancing Actuator for Hollow Rotors of Machine Tool Spindles