Abstract:Previous studies showed that opening windows could help with kitchen ventilation in pollutant removal. However, no studies have systematically examined the impacts of window positions on kitchen hood performance, and there is insufficient information on indoor airflow characteristics and pollutant distribution from makeup air through open windows. Therefore, the objective of this study was to use a validated computational fluid dynamics approach with CO2 as an indoor air quality indicator (a surrogate for cooking emissions) to understand the impacts of exhaust flow rate and the window opening position on the flow characteristics, concentration distribution, and capture efficiency (CE) of the hood. We conducted four‐point validation tests of the numerical models based on CO2 concentration and temperature measurements under steady‐state conditions. The validated models were subsequently used in simulations to understand the effects of six different window opening positions and the two exhaust flow rates on exposure. We found that the CO2 concentration could be better reduced by having windows open at the higher location. Generally, the front windows were more effective with CE > 80%, followed by the back and the side windows, respectively. We also found that as the exhaust flow rate increased from 6.72 to 12.16 m3/min, CE reached >75% for all window positions, where the most significant increase was 1.58 times for the lower side window. To sum up, changing the relative position of the window and the exhaust hood could help disperse the incoming airflow from the window, improve the kitchen's overall ventilation, and reduce pollutant concentration.

Numerical Analysis on Thermal Environment Evaluation in Kitchen with Range Hood

Numerical evaluation of the air quality and thermal comfort in the cooking kitchen under exhausting effects of the range hood

Orthogonal Design on Range Hood with Air Curtain and Its Effects on Kitchen Environment

Control of temperature and fume generation by cooking in a residential kitchen by ceiling radiative cooling and fume hood extraction

Indoor air quality and energy-saving potential improvement of a range-hood-integrated air cleaner

Numerical simulation of aerodynamic noise and noise reduction of range hood

Optimization of Local Ventilation System for Gaseous Pollutants Removal in Broiler House Using CFD Simulation

Numerical Simulation on Central Exhaust System Design for Residential Kitchen in High-Rise Buildings

Study on the Influence of Fresh Air System of Range Hood on Kitchen Air Quality

Numerical Investigation of the Capture Efficiency of a Domestic Range Hood

Effects of Window Position and Exhaust Flow Rate on Residential Kitchen Hood Performance: A Validated Numerical Approach

Effects of chef operation on oil fume particle collection of household range hood

Make-up Air Optimization and Demand Exhaust Rate of Commercial Kitchens under Multiple Cookers Operation

Energy Savings of Commercial Kitchen Ventilation and Air Conditioning Systems Based on Cooking Oil Control and Thermal Comfort

Factors Influencing the Airflow Rate of Kitchens in Cooking Exhaust Shaft System of High-Rise Residential Buildings

Numerial Simulation of Flow Field in the Multi-Blade Centrifugal Fan of Range Hoods

Exhaust rate for range hood at cooking temperature near the smoke point of edible oil in residential kitchen

Cooking generated particles’ impact on indoor air quality of university cafeteria

Indoor Thermal Environment and Air Quality in Chinese‐style Residential Kitchens

Capture Efficiency and Thermal Comfort in Chinese Residential Kitchen with Push-Pull Ventilation System in Winter-a Field Study

A pilot study on characterization of air pollutants from typical Chinese cooking with clean fuels without and with range hood usage