Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

Homing algorithm analysis of a cable-driven humanoid-arm manipulator

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

Dual-Loop Control of Cable-Driven Snake-like Robots

Visual Tracking Control of Cable-Driven Hyper-Redundant Snake-Like Manipulator

Hybrid Tension-Position Control of Cable-Driven Serial Manipulator to Improve Accuracy and Avoid Cable Slack and Breakage

Motion control strategy and stability analysis for high-speed cable-driven camera robots with cable inertia effects

Generalized Flexible Hybrid Cable-Driven Robot (HCDR): Modeling, Control, and Analysis

Stiffness-Based Hybrid Motion/ Force Control for Cable-Driven Serpentine Manipulator*

A Closed-Loop Controller for Cable-Driven Hyper-Redundant Manipulator with Joint Angle Sensors.

Innovative Design Research on a Cable-Driven Humanoid Robotic Arm

Vision-based simultaneous measurement of manipulator configuration and target pose for an intelligent cable-driven robot

Design and validation of cable-driven hyper-redundant manipulator with a closed-loop puller-follower controller

A Kinematic Equivalence Trajectory Planning Method of Hybrid Active and Passive Cable-Driven Segmented Hyper-Redundant Manipulator.

Stiffness Optimization of Cable-Driven Humanoid Manipulators

Kinematic and static analysis of a cable-driven 3-DOF delta parallel mechanism for haptic manipulators

Homing Strategy for a Redundantly Actuated Parallel Kinematic Machine

Manipulability Analysis for Cable-Driven Hyper-Redundant Manipulators

Research on the Orientation Error of the Translational Cable-Driven Parallel Robots

Inverse Kinematics Solution Method of an Adaptive Piecewise Geometry for Cable-Driven Hyper-Redundant Manipulator

Dynamic Feedforward Control of Spatial Cable-Driven Hyper-Redundant Manipulators for On-Orbit Servicing

Dynamic Modeling, Workspace Analysis and Multi-Objective Structural Optimization of the Large-Span High-Speed Cable-Driven Parallel Camera Robot