Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

Manipulability Analysis for Cable-Driven Hyper-Redundant Manipulators

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

Kinematics, Dynamics, and Control of a Cable-Driven Hyper-Redundant Manipulator

Design, Modeling and Kinematics Analysis of a Modular Cable-Driven Manipulator

Cable Configuration and Driving Force Analysis of a Cable-Driven Hyper-Redundant Manipulator

Inverse Kinematics Solution Method of an Adaptive Piecewise Geometry for Cable-Driven Hyper-Redundant Manipulator

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

A Cable-Driven Hyperredundant Manipulator: Obstacle-Avoidance Path Planning and Tension Optimization

Force Sensing and Compliance Control for a Cable-Driven Redundant Manipulator

Analysis and Validation of a Flexible Limb/Cable Hybrid-Driven Parallel Continuum Manipulator

Design, Dynamics, and Workspace of A Hybrid-Driven-Based Cable Parallel Manipulator

A Novel Coiled Cable-Conduit-Driven Hyper-Redundant Manipulator for Remote Operating in Narrow Spaces

A Closed-Loop Controller for Cable-Driven Hyper-Redundant Manipulator with Joint Angle Sensors.

Kinematic Analysis and Simulation of a 7-DOF Cable-Driven Manipulator

Visual Tracking Control of Cable-Driven Hyper-Redundant Snake-Like Manipulator

A Kinematic Equivalence Trajectory Planning Method of Hybrid Active and Passive Cable-Driven Segmented Hyper-Redundant Manipulator.

Workspace quality analysis and application for a completely restrained 3-Dof planar cable-driven parallel manipulator

Design And Analysis Of A Lightweight Flexible Cable-Driven Manipulator

Design and Analysis of 7-DOF Cable-Driven Manipulator

Stiffness and Dexterous Performances Optimization of Large Workspace Cable-Driven Parallel Manipulators.

A Hybrid Active and Passive Cable-Driven Segmented Redundant Manipulator Design, Kinematics and Planning