Abstract:Advances in Mechanical Engineering, Volume 16, Issue 5, May 2024. The energy harvester based on the piezoelectric effect can convert the vibration energy in the environment into electricity to power the network nodes. In order to broaden the effective frequency bandwidth of the piezoelectric energy harvester and reduce the resonant frequency of the system, a liquid slosh-type piezoelectric energy harvester is proposed in this paper. Based on the theory of the piezoelectric effect, the mechanical model and electromechanical coupling model of the piezoelectric energy harvester were established, and the dynamic characteristics of the liquid slosh piezoelectric energy harvester were analyzed. Based on theoretical model and experimental test, the liquid slosh piezoelectric energy harvester is studied. By making a prototype and building a vibration experiment platform, the energy capture characteristics of the piezoelectric energy harvester were tested experimentally. The experimental results show that when the external excitation frequency is close to the first resonant frequency, the maximum output power of the liquid sloshing piezoelectric energy harvester is 0.068 mW, and the optimal matched impedance is 440 kΩ. When the external excitation frequency is close to the second resonant frequency, the maximum output power of the liquid sloshing piezoelectric energy harvester is 0.178 mW, and the optimal matching load resistance is 600 kΩ. Compared with the traditional cantilever beam piezoelectric energy harvester, the liquid slosh piezoelectric energy harvester has a lower resonant frequency and achieves two resonant peaks in the range of 1–20 Hz, which greatly widens the effective frequency bandwidth and improves the energy capture efficiency of the piezoelectric energy harvester.

Liquid-encapsulated Energy Harvester for Low Frequency Vibrations

Development and Modeling of an Electromagnetic Energy Harvester from Pressure Fluctuations

Development of an Electromagnetic Energy Harvester for Ultra-Low Frequency Pitch Vibration of Unmanned Marine Devices

A multi-frequency piezoelectric vibration energy harvester with liquid filled container as the proof mass

Polyvinylidene Fluoride‐Based Vibration Energy Harvester with Piezoelectric and Electromagnetic Effects

Dynamic modeling and experimental validation of a low frequency piezoelectric vibration energy harvester via secondary excitation of pressured fluid

Output Characteristics of an Electromagnetic–Triboelectric Hybrid Energy Harvester Based on Magnetic Liquid

A high figure of merit vibrational energy harvester for low frequency applications

Repulsively Driven Frequency-Increased-Generators For Durable Energy Harvesting From Ultra-Low Frequency Vibration

Design and test of liquid sloshing piezoelectric energy harvester

Harvesting vibrational energy with liquid-bridged electrodes: thermodynamics in mechanically and electrically driven RC-circuits

A low-frequency vibration energy harvester employing self-biased magnetoelectric composite

Non-resonant Electromagnetic Wideband Energy Harvesting Mechanism for Low Frequency Vibrations

Low Frequency Wide Bandwidth MEMS Energy Harvester Based on Spiral-Shaped PVDF Cantilever

Multimodal MEMS Vibration Energy Harvester with Cascaded Flexible and Silicon Beams for Ultralow Frequency Response

A broadband E-shaped piezoelectric energy harvester based on vortex-shedding induced vibration from low velocity liquid flow

A MEMS rotary comb mechanism for harvesting the kinetic energy of planar vibrations

A Packaged Electrostatic Energy Harvester with Micro-Molded Bulk Electrets

Vibration Energy Harvesting Using Macro-Fiber Composites

Low frequency piezoelectric energy harvesting at multi vibration mode shapes

Electromagnetic Energy Harvesting from Vibrations of Multiple Frequencies