Abstract:This research focuses on the structural behaviors of partially concrete-filled welded integral T-joints in steel truss bridges. The T-shape integral joints, which are composed of welded box-section members, were simply supported at chord ends so that the loading cases of horizontal force and vertical force at brace end can be considered. Static tests are first conducted for six specimens, of which three are with arc transitions at chord-to brace corners and the other three are without arc transitions. Three cases of concrete filling in chord, i.e., hollow chord, partial concrete filling in chord, and full concrete filling in chord, were considered. The elastic and elastoplastic behaviors including rigidities, steel strains at critical locations, failure modes, characteristic loads, and characteristic deflections of the joints were obtained. The effects of internal concrete were comparatively analyzed. Finite element models were also developed to predict the load bearing capacities of joints by considering various concrete filling ranges in the chord. The numerical outputs were validated by the test results. The influences of concrete filling length on structural behaviors including elastic rigidity, yield load, and ultimate load were revealed on the basis of numerous parametric studies. Both experimental and numerical results indicate that the joints whose chords have been partially filled with concrete are expected to provide the structural behaviors as good as those of fully concreted-filled joints, both of which are obviously higher than those of hollow joints (i.e., without concrete filling in chord). The optimal concrete filling lengths in the chord of welded integral joints are suggested to be three times the chord's sectional height by considering both beneficial and adverse effects of internal concrete.

Steel Truss Bridges with Welded Box-Section Members and Bowknot Integral Joints, Part I: Linear and Non-Linear Analysis

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Stability Analysis of Yinxian Second Bridge

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

Steel truss bridges with welded box-section members and bowknot integral joints, Part II: Minimum weight optimization

Static Calculation and Optimization Analysis of Steel Truss Bridge Structures Containing Members with Section-Shrunk Ends

Behaviors of Partially Concrete-Filled Welded Integral T-joints in Steel Truss Bridges

Experimental and numerical analyses on stress concentration factors of concrete-filled welded integral K-joints in steel truss bridges

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Existing Railway Steel Truss Bridge Static Experimental Analysis Based on Full-Bridge-Model

Structural Analysis of Partially Concrete-filled and Welded Integral T-joints in Steel Truss Girders

NSF-Based Analysis of the Structural Stressing State of Trussed Steel and a Concrete Box Girder.

Nonlinear analysis of composite steel-concrete beams with open sections under combined bending and torsion

Nonlinear stability analysis of the steel truss arch bridge

Experimental analysis of the truss-to-column connection in a modularized prefabricated steel structure

Numerical simulation analysis of construction of steel truss arch bridge with in-situ reconstruction of continuous girder bridge

Comparative Experiments on Arc Transition of Welded Integral Joints in Steel Truss Bridge

Fatigue Performance Evaluation of K-Type Joints in Long-Span Steel Truss Arch Bridge

Secondary Optimization of Steel Truss Structures Based on Section-Shrinkage of Member Ends