Abstract:Biodegradable implants are a new concept to substitute current nondegradable medical materials. The biodegradable implant can decompose in the patients' body when the treatment is finished and be discharged through metabolism. Mg alloys, with their biocompatibility and high reactivity, meet the requirements of a biodegradable material. Also, Mg has a similar density to the human bones and the lowest elastic modulus among the structural metallic biomaterials, which can mitigate the stress shielding effect. For Mg-Zn-Ca alloys, besides the merits of Mg, Zn is related to bone metabolism and osteopathic phosphate activity, while Ca is the main element of bones that is essential for the synthesis of bone compounds. However, the degradation rate of Mg alloy implants needs to be controlled, or the implant may corrode too fast, causing local hydrogen accumulation and alkalization that hurts the patients. One of the effective ways to improve the alloy corrosion resistance is by coating. Ca-P coatings, such as brushite (dicalcium phosphate dihydrate, DCPD) and hydroxyapatite (HA), can mitigate the degradation rate of Mg alloys and show good biocompatibility and osseointegration. Electrodeposition is a simple way to synthesize coatings on metallic materials with an easy experimental set-up, and the process parameters are highly controllable. Even though there are plenty of reports about the fabrication of Ca-P coatings on Mg alloys through electrodeposition, few of them focus on the film formation mechanism. Issues related to coating defect formation and inhomogeneity are rarely discussed. Therefore, this report focuses on the film formation mechanism and the relationship to the defects of the electrodeposited DCPD coating on a Mg-2.5wt%Zn-1wt%Ca alloy. By altering the deposition potential, the reduction reactions that proceed on the substrate are different. The involvement of H 2 O reduction affects the formation of DCPD and changes the microstructure of the coating. Combining electrochemical tests and microstructure analysis, the corrosion properties of the coatings are measured, and the results are linked to the difference in film microstructure and defects. With SEM/FIB cross-sectional observations, the formation mechanism of the coatings and the relationship to the process condition will be discussed. The degradation rate of Mg alloys can be tuned by understanding the DCPD film formation mechanism and the cause of the defects.

A Novel Biodegradable Nicotinic Acid/Calcium Phosphate Composite Coating on Mg-3zn Alloy

Characterization and property of the nicotinic acid/calcium phosphate composite coatings on Mg alloy

Preparation and in Vitro Degradation of the Composite Coating with High Adhesion Strength on Biodegradable Mg–Zn–Ca Alloy

Preparing Ca-P Coating on Biodegradable Magnesium Alloy by Hydrothermal Method: in Vitro Degradation Behavior

A Biodegradable Coating Based on Self‐Assembled Hybrid Nanoparticles to Control the Performance of Magnesium

Evaluating the Electrochemical and In Vitro Degradation of an HA-Titania Nano-Channeled Coating for Effective Corrosion Resistance of Biodegradable Mg Alloy

Exploration of the Enhanced Performances for Silk Fibroin/sodium Alginate Composite Coatings on Biodegradable Mg−Zn−Ca Alloy

Tailoring Biodegradation of Mg-Ca Alloy by Acid Pickling and Polydioxanone/n-Hydroxyapatite Composite Coating for Temporary Implant Applications

Enhanced Biocompatibility and Osteogenic Property of Biodegradable Zn-0.5Li Alloy through Calcium–Phosphorus Coating

Strontium-zinc-based Phosphate Coatings Fabricated in Situ on the Zinc-Pretreated Magnesium Alloy for Degradation Control and Cytocompatibility Enhancement

Fabrication and Characterization of Rod-Like Nano-Hydroxyapatite on MAO Coating Supported on Mg–Zn–Ca Alloy

Enhancement of Corrosion Resistance and Biocompatibility of Mg-Nd-Zn-Zr Alloy Achieved with Phosphate Coating for Vascular Stent Application

Surface Modification by Natural Biopolymer Coatings on Magnesium Alloys for Biomedical Applications

Composite Nanocoatings of Biomedical Magnesium Alloy Implants: Advantages, Mechanisms, and Design Strategies

A Novel Anti-Corrosion and Antibacterial Integrated MAO/PCNZ Composite Coating on AZ31B Mg Alloy

(Digital Presentation) Formation Mechanism and Defects of Electrodeposited Ca-P Coating on Biodegradable Mg-Zn-Ca Alloy

In Vitro Studies Regarding the Effect of Cellulose Acetate-Based Composite Coatings on the Functional Properties of the Biodegradable Mg3Nd Alloys

In Vitro Degradation of MAO/PLA Coating on Mg-1.21Li-1.12Ca-1.0Y Alloy

A chitosan/polylactic acid composite coating enhancing the corrosion resistance of the bio-degradable magnesium alloy

A novel Mg(OH)2/MgFx(OH)1−x composite coating on biodegradable magnesium alloy for coronary stent application

Engineering Triphasic Nanocomposite Coatings on Pretreated Mg Substrates for Biomedical Applications