Abstract:The performance of the new generation aero-engine is strongly dependent on the application of integral blisk technologies, while the high-risk failure of integral disk joints severely restricts the promotion of those technologies. Therefore, the molecular dynamics method is used to investigate the influence of nanopores on the tensile properties of single crystal/polycrystalline Ni composites. The results show that the addition of single crystal nickel can increase the tensile strength of single crystal/polycrystalline Ni compared with polycrystalline nickel. The influence of pore position distribution on the tensile properties of single crystal/polycrystalline Ni is investigated. The simulation results show that nanopore defects in a single crystal region significantly aggravate the fracture at the single crystal/polycrystalline Ni interface. Pores not only penetrate the interface of composites but also rapidly expand inside the single crystal and the polycrystalline crystal, in which the interface of composites is further reduced resulting in the failure acceleration of single crystal/polycrystalline Ni composites. On the contrary, when the pores are in a polycrystalline region, the interface of single crystal/polycrystalline Ni hinders the amorphization of the polycrystalline nickel side and inhibits the pores from spreading toward the interface. When the pores are in the interface region, the pores do not continue to expand into the single crystal, but propagate inside the polycrystalline crystal. The effect of the porosity of interface pores on the tensile properties of single crystal/polycrystalline Ni is also discussed. It is found that the tensile strength of single crystal/polycrystalline Ni decreases rapidly when the void porosity exceeds 0.8%. Finally, the influence of the number of voids on the tensile properties while maintaining the porosity of the interface pores is analyzed. When the porosity of the prefabricated pores of the interface is kept constant at 0.8%, the larger the number of pores (i.e., the smaller the pores), the larger the elastic modulus. In the plastic deformation stage, due to the large number of dispersed small pore structures at the interface of the single crystal/polycrystalline Ni composites, the dislocation motion is hindered, which plays a certain strengthening role and improves the tensile strength of the single crystal/polycrystalline Ni composites. It can be concluded that single crystal/polycrystalline Ni with dispersed small pores has better tensile properties than those with large pores.

Effects of pore size on the mechanical properties of three-dimensionally ordered macroporous nickel

Effects of Pore Design on Mechanical Properties of Nanoporous Silicon

Effect of Pore Sizes on the Microstructure and Properties of the Biomedical Porous NiTi Alloys Prepared by Microwave Sintering

Excellent Mechanical Properties of Three-Dimensionally Ordered Macroporous Nickel Photonic Crystals

Effect of Nanopores on Tensile Properties of Single Crystal/Polycrystalline Nickel Composites

Size Effect Affected Mechanical Properties and Formability in Micro Plane Strain Deformation Process of Pure Nickel

Size Effects on the Strengthening/Toughening of Nanostructured Metallic Multilayers

The Effects of Morphology and Temperature on the Tensile Characteristics of Carbon Nitride Nanothreads.

A Unified Empirical Equation for Determining the Mechanical Properties of Porous NiTi Alloy: From Nanoporosity to Microporosity

Size effect of nickel-based single crystal superalloy revealed by nanoindentation with low strain rates

Size Effects Affected Uniaxial Tensile Properties and Formability in Rubber Pad Microforming Process of Pure Nickel Thin Sheets

Effects of pore diameter and B2-NiTi crystal on plasticity of amorphous Ni-Ti alloy based on molecular dynamics simulation

Nanoscale Origins of the Size Effect in the Compression Response of Single Crystal Ni-Base Superalloy Micro-Pillars

Effect of pore design on the mechanical properties of nanoporous high-entropy alloys

Mechanical Behavior and Size Sensitivity of Nanocrystalline Nickel Wires Using Molecular Dynamics Simulation

Magnetic Field Tunable Small-scale Mechanical Properties of Nickel Single Crystals Measured by Nanoindentation Technique

Length scale dependent plasticity of amorphous/amorphous NiNb/ZrCuNiALSI nanolaminates

Study on Lightweight and Strengthening Effect of Carbon Nanotube in Highly Ordered Nanoporous Nickel: A Molecular Dynamics Study

Size Effects on the Mechanical Properties of Nanoporous Graphene Networks

High Strain Rate Compressive Deformation Behavior of Nickel Microparticles

Effect of pores on microscopic wear properties and deformation behavior of Ni-Cr alloy coating