Abstract:Recycled concrete, which is formed by replacing coarse aggregates in ordinary concrete with recycled aggregates (RA), is of great significance for the secondary utilization of waste building resources. In civil engineering, concrete structures are sometimes subjected to a compression-shear multiaxial stress state. Therefore, research on the compression-shear multiaxial mechanical properties of recycled concrete plays an important role in engineering practice. To explore the effect of RA replacement rate on the compression-shear properties of recycled concrete, an experimental study was carried out using a compression-shear testing machine and considering five RA replacement rates and five axial compression ratios. Consequently, the failure modes and mechanical property parameters under different working conditions were obtained and were used to analyze the effects of RA replacement rate and axial compression ratio on the shear stress of recycled concrete. Eventually, the following conclusions were reached: With the growth of axial compression ratio, the shear cracks exhibit a developing trend along the oblique direction, and the friction traces on the shear surface are gradually deepened. As the replacement rate increases, the number of shear cracks is gradually increased, accompanied by increasing broken fragments falling off from the shear interface. Since the action of the axial compression ratio can effectively improve the mechanical bite force and friction on the shear interface of recycled concrete, as the axial compression ratio increases, the shear stress is gradually increased. On the other hand, due to the initial damage of RA and its weak adhesion with cement mortar, the shear stress is gradually reduced with the increase of RA replacement rate. Meanwhile, the increase in shear stress shows a gradually decreasing trend with the growth of axial compression ratio. Specifically, for the RA replacement rates of 0% and 100%, the shear stress increased by 4.06 times and 3.21 times, respectively, under the influence of the axial compression ratio. Under different axial compression ratios, the shear stress was reduced by 43~46%, due to the increase of RA replacement rate. In addition, based on the octahedral stress space and the principal stress space, a compression-shear multiaxial failure criterion and shear stress calculation model for recycled concrete were proposed, by considering the effect of the RA replacement rate. The outcomes of this research are of great significance for engineering applications and the development of recycled concrete.

Fatigue Behavior of Recycled Aggregate Concrete under Compression and Bending Cyclic Loadings

Behavior of FRP-Confined Recycled Brick Aggregate Concrete under Monotonic Compression

Compressive Behavior of CFRP-Confined Recycled Aggregate Concrete in Different-Sized Circular Sections (vol 17, pg 313, 2020)

Flexural Behavior and Durability Properties of Recycled Aggregate Concrete (RAC) Beams Subjected to Long-Term Loading and Chloride Attacks

Fundamental behaviour of recycled aggregate concrete - Overview I: strength and deformation

Performance of Recycled Aggregate Concrete in A Real Project

High-strain Rate Compressive Behavior of Concrete Made with Substituted Coarse Aggregates: Recycled Crushed Concrete and Clay Bricks

Analysis of Compressive Fatigue Failure of Recycled Aggregate Concrete

Performance of Recycled Concrete Beams under Sustained Loads Coupled with Chloride Ion (cl−) Ingress

Fatigue damage evolution of modified recycled aggregate concrete

STRUCTURAL BEHAVIOUR OF RECYCLED AGGREGATE CONCRETE BEAMS FLEXURAL STRENGTHENED WITH CFRP SHEETS UNDER MONOTONIC AND FATIGUE LOADING

Study on stress–strain relationship and constitutive model of recycled aggregate concrete under axial cyclic compression

Variable fatigue loading effects on corrugated steel box girders with recycled concrete

Review on the Fatigue Properties of Recycled Asphalt Concrete Containing Construction and Demolition Wastes

Experimental Study and Analytical Modeling on Fatigue Properties of Pervious Concrete Made with Natural and Recycled Aggregates

Experimental Study and Theoretical Analysis on the Compression-Shear Multiaxial Mechanical Properties of Recycled Concrete

Mesoscale-based failure mechanism of recycled aggregate concrete under axial compression considering end restraint effect

Mesomechanical properties of concrete with different shapes and replacement ratios of recycled aggregate based on base force element method

Mechanical properties of recycled aggregate concrete containing brick particles

Effects of recycled aggregate combinations and recycled powder contents on fracture behavior of fully recycled aggregate concrete

Flexural Behavior of Corroded Reinforced Recycled Aggregate Concrete Beams