Abstract:Nafion/SNPAEK-x composite membranes were prepared by blending raw Nafion and synthesized side-chain-type naphthalene-based sulfonated poly(arylene ether ketone) with a sulfonation degree of 1.35 (SNPAEK-1.35). The incorporation of SNPAEK-1.35 polymer with ion exchange capacity (IEC) of 2.01 mequiv·g-1 into a Nafion matrix has the property enhancement effects, such as increasing IECs, improving proton conductivity, enhancing mechanical properties, reducing methanol crossover, and improving single cell performance of Nafion. Morphology studies show that Nafion/SNPAEK-x composite membranes exhibit a well-defined microphase separation structure depending on the contents of SNPAEK-1.35 polymer. Among them, Nafion/SNPAEK-7.5% with a bicontinuous morphology exhibits the best comprehensive properties. For example, it shows the highest proton conductivities of 0.092 S cm-1 at 25 °C and 0.163 S cm-1 at 80 °C, which are higher than those of recast Nafion with 0.073 S cm-1 at 25 °C and 0.133 S cm-1 at 80 °C, respectively. Nafion/SNPAEK-5.0% and Nafion/SNPAEK-7.5% membranes display an open circuit voltage of 0.77 V and a maximum power density of 47 mW cm-2 at 80 °C, which are much higher than those of recast Nafion of 0.63 V and 24 mW cm-2 under the same conditions. Nafion/SNPAEK-5.0% membrane also has comparable tensile strength (12.7 MPa) to recast Nafion (13.7 MPa), and higher Young's modulus (330 MPa) than that of recast Nafion (240 MPa). By combining their high proton conductivities, comparable mechanical properties, and good single cell performance, Nafion/SNPAEK-x composite membranes have the potential to be polymer electrolyte materials for direct methanol fuel cell applications.

Preparation and Characterization of Semi-Ipn Fluorine Containing Polybenzimidazole/Nafion Composite Membrane for Fuel Cells

Proton conducting membranes based on semi-interpenetrating polymer network of Nafion® and polybenzimidazole

Synthesis and Characterization of Nafion/cross-linked PVP Semi-Interpenetrating Polymer Network Membrane for Direct Methanol Fuel Cell

Semi-interpenetrating Polymer Networks Based-on End-Group Crosslinked Fluorine-Containing Polyimide Via Click Chemistry

Synthesis and Characterization of Fluorine-Containing Polybenzimidazole for Proton Conducting Membranes in Fuel Cells

Semi-interpenetrating polymer networks of Nafion® and fluorine-containing polyimide with crosslinkable vinyl group

Synthesis and Properties of Sulfonated Polyimide/Polybenzimidazole Cross-Linked Membranes for Fuel Cell Applications

Crosslinked Hexafluoropropylidene Polybenzimidazole Membranes with Chloromethyl Polysulfone for Fuel Cell Applications

Composite Polymer Electrolyte Membranes Based on Nafion and Modified PVDF Electrospun Nanofiber Mats

Nafion/PTFE composite membranes for fuel cell applications

Preparation and Characterization of Novel Pyridine-Containing Polybenzimidazole Membrane for High Temperature Proton Exchange Membrane Fuel Cells

Proton Exchange Membranes Based on Semi-Interpenetrating Polymer Networks of Fluorine-Containing Polyimide and Nafion®

Porous Polybenzimidazole Membranes with Excellent Chemical Stability and Ion Conductivity for Direct Borohydride Fuel Cells

Composite membranes of Nafion and poly(styrene sulfonic acid)-grafted poly(vinylidene fluoride) electrospun nanofiber mats for fuel cells

Covalently Cross-Linked Sulfone Polybenzimidazole Membranes with Poly(vinylbenzyl Chloride) for Fuel Cell Applications.

Property Enhancement Effects of Side-Chain-Type Naphthalene-Based Sulfonated Poly(arylene ether ketone) on Nafion Composite Membranes for Direct Methanol Fuel Cells

Polybenzimidazole Membranes Modified with Polyelectrolyte-Functionalized Multiwalled Carbon Nanotubes for Proton Exchange Membrane Fuel Cells

Proton exchange membranes based on semi-interpenetrating polymer networks of polybenzimidazole and perfluorosulfonic acid polymer with hollow silica spheres as micro-reservoir

A Novel Crosslinking Organic–inorganic Hybrid Proton Exchange Membrane Based on Sulfonated Poly(arylene Ether Sulfone) with 4-Amino-phenyl Pendant Group for Fuel Cell Application

Polyelectrolyte Composite Membranes of Polybenzimidazole and Crosslinked Polybenzimidazole-Polybenzoxazine Electrospun Nanofibers for Proton Exchange Membrane Fuel Cells

Preparation and characterization of PTFE based composite anion exchange membranes for alkaline fuel cells