Abstract:In this study, we controlled the growth of crystalline plane to synthesize the vertical platinum nanopelts onto fluorine doped tin oxide (FTO) glass to construct the platinum nanoroses (PtNRs) by an easy electrochemical deposition (ECD) method at room temperature in the normal atmospheric environment, and applied the PtNRs as a counter electrode (CE) for dye-sensitized solar cell (DSSC). The morphologies and crystalline nanostructures of the ECD PtNRs were examined by field emission scanning electron microscopy and the high-resolution transmission electron microscopy. The electrocatalytic properties of the ECD PtNRs were analyzed by cyclic voltammetry and electrochemical impedance spectrum. The power conversion efficiency (PCE) of the DSSC assembled with the ECD PtNRs CE was examined under the illumination of AM 1.5 (100mWcm−2). The ECD PtNRs showed well contact behavior with FTO surface and offered a large surface area to promote the redox reaction rates therefore increased the exchange current density. Due to the PtNRs showed the macroporous structure, the electrolyte can easily diffuse through the open space between the nanopelts, resulting in improved kinetics for charge-transfer processes and reduced the charge-transfer resistance. Our findings suggest that the catalytic efficiency of PtNRs with a specific crystal plane was significantly greater than that of a traditional Pt film catalyst. In combination with a N719 dye-sensitized TiO2 working electrode and an iodine-based electrolyte, the DSSC assembled with the PtNRs CE achieved a PCE of 6.58%, almost 10% higher than that of a cell prepared with a conventional sputtering Pt film CE (6.00%). These results provide a potential strategy for electrochemical catalytic applications.

Preparation of Platinized Electrode Via Photo-Platinization Technique for Flexible Dye- Sensitized Solar Cells

Electrodeposition of Platinum on Plastic Substrates As Counter Electrodes for Flexible Dye-Sensitized Solar Cells

High-performance plastic platinized counter electrode via photoplatinization technique for flexible dye-sensitized solar cells.

Preparation and Properties of Flexible Dye-Sensitized Solar Cells

Preparation of Flexible Pt Counter Electrode on Indium-Doped Tin Oxide Coated Polyethylene Naphthalate for Dye-Sensitized Solar Cells

Indirect Preparation of Titanium Dioxide Oxidation Plating Layer as Photoelectrode Used in Dye-Sensitized Solar Cells

High Performance Dye-Sensitized Solar Cells Based on Platinum Nanoroses Counter Electrode

Platinum Nanoparticles on Flexible Carbon Fiber Paper Without Transparent Conducting Oxide Glass As Counter Electrode for Dye‐Sensitized Solar Cells

Facile fabrication of highly porous photoanode at low temperature for all-plastic dye-sensitized solar cells with quasi-solid state electrolyte

The effect of dispersion of TiO 2 nanoparticles on preparation of flexible dye-sensitized photoanodes

Enhanced Efficiency of Dye-Sensitized Solar Cells Based on Polymer-Assisted Dispersion of Platinum Nanoparticles/Carbon Nanotubes Nanohybrid Films as FTO-Free Counter Electrodes

Research on solar cell preparation technology for cutting-edge technology

Effects of Thickness of TiO_2 Graded Film on the Photovoltaic Performance for Flexible Dye-Sensitized Solar Cells

OPTIMIZATION OF FABRICATION PARAMETERS OF FLEXIBLE DYE-SENSITIZED SOLAR CELLS

Effects of Thickness of TiO2 Graded Film on the Photovoltaic Performance for Flexible Dye Sensitized Solar Cells

Plastic Dye-Sensitized Solar Cells with Enhanced Performance Prepared from A Printable Tio2 Paste

A Convenient Method for Manufacturing TiO2 Electrodes on Titanium Substrates

Nickel sulfide counter electrode modified with polypyrrole nanoparticles to enhance catalytic ability for flexible dye-sensitized solar cells

Highly Catalytic Active Nanostructured Pt Electrodes for Dye-Sensitized Solar Cells Prepared by Low Temperature Electrodeposition

Selective Laser Sintering Of Tio2 Nanoparticle Film On Plastic Conductive Substrate For Highly Efficient Flexible Dye-Sensitized Solar Cell Application

Facile Synthesis of Poly(3,4-Ethylenedioxythiophene) Film Via Solid-State Polymerization As High-Performance Pt-free Counter Electrodes for Plastic Dye-Sensitized Solar Cells.