Abstract:In this paper, the finite element method (FEM) based on GTN model is used to investigate the ductile crack growth behavior in single edge-notched bend (SENB) specimens of a dissimilar metal welded joint (DMWJ) composed of four materials in the primary systems of nuclear power plants. The J–Δa resistance curves, crack growth paths and local stress–strain distributions in front of crack tips are calculated for eight initial cracks with different locations in the DMWJ and four cracks in the four homogenous materials. The results show that the initial cracks with different locations in the DMWJ have different crack growth resistances and growth paths. When the initial crack lies in the centers of the weld Alloy182 and buttering Alloy82, the crack-tip plastic and damage zones are symmetrical, and the crack grow path is nearly straight along the initial crack plane. But for the interface cracks between materials and near interface cracks, the crack-tip plastic and damage zones are asymmetric, and the crack growth path has significant deviation phenomenon. The crack growth tends to deviate into the material whose yield stress is lower between the two materials on both sides of the interface. The different initial crack locations and mismatches in yield stress and work hardening between different materials in the DMWJ affect the local stress triaxiality and plastic strain distributions in front of crack tips, and lead to different ductile crack growth resistances and growth paths. For the accurate integrity assessment for the DMWJ, the fracture toughness data and resistance curves for the initial cracks with different locations in the DMWJ need to be obtained.

Effects of local mechanical and fracture properties on LBB behavior of a dissimilar metal welded joint in nuclear power plants

LBB analysis of a dissimilar metal weld joint of pipe-nozzle in nuclear power plant

Local fracture properties and dissimilar weld integrity in nuclear power systems

Local Mechanical Properties and Microstructures of Alloy52M Dissimilar Metal Welded Joint Between A508 Ferritic Steel and 316L Stainless Steel

Local fracture properties and dissimilar weld integrity in nuclear power plants

Local Mechanical Properties of A Dissimilar Metal Welded Joint in Nuclear Power Systems

An Experimental Investigation of In-Plane Constraint Effect on Local Fracture Resistance of A Dissimilar Metal Welded Joint

Local fracture resistance behavior of interface regions in a dissimilar metal welded joint

Local fracture behavior in an Alloy 52M dissimilar metal welded joint in nuclear power plants

Fracture Mechanism of a Dissimilar Metal Welded Joint in Nuclear Power Plant

Leak-before-break analysis of a dissimilar metal welded joint for connecting pipe-nozzle in nuclear power plants

In-situ observations on local fracture behavior in a dissimilar metal weld joint of nuclear power plant

Leak-before-break Analysis of a Dissimilar Metal Welded Overlay Structure for Connecting Pipe-Nozzle of Nuclear Reactor Pressure Vessel to Safe End

Out-of-plane Constraint Effect on Local Fracture Resistance of a Dissimilar Metal Welded Joint

Numerical Analysis of Constraint and Strength Mismatch Effects on Local Fracture Resistance of Bimetallic Joints

An experimental investigation of local fracture resistance and crack growth paths in a dissimilar metal welded joint

Local failure behavior of a dissimilar metal interface region with mechanical heterogeneity

Effects of Residual Stress on Failure Mode of Pressure Vessels

Effect of Inhomogeneous Mechanical Properties on the Stress-Strain Field at the Crack Tip and Crack Growth Direction in Dissimilar Metal Welded Joints

Numerical Investigation of Ductile Crack Growth Behavior in a Dissimilar Metal Welded Joint

Comparison of destructive and non-destructive fracture toughness measurements for Q235 steel butt-welded joint