Abstract:This paper presents an experimental study and micro-mechanism discussion on gypsum role in the mechanical improvements of cement-based stabilized clay (CBSC). A soft marine clay at two initial water contents (i.e. 50% and 70%) was treated by reconstituted cementitious binders with varying gypsum to clinker (G/C) ratios and added metakaolin to facilitate the formation of ettringite, followed by the measurements of final water contents, dry densities and strengths in accordance with ASTM standards as well as microstructure by mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM). Results reveal that the gypsum fraction has a significant influence on the index and mechanical properties of the CBSC, and there exists a threshold of the G/C ratio, which is 10% and 15% for clays with 50% and 70% initial water contents, respectively. Beyond which adding excessive gypsum cannot improve the strength further, eliminating the beneficial role. At these thresholds of the G/C ratio, the unconfined compressive strength (UCS) values for clays with 50% and 70% initial water contents are 1.74 MPa and 1.53 MPa at 60 d of curing, respectively. Microstructure characterization shows that, besides the common cementation-induced strengthening, newly formed ettringite also acts as significant pore infills, and the associated remarkable volumetric expansion is responsible, and may be the primary factor, for the beneficial strength gain due to the added gypsum. Moreover, pore-filling ettringite also leads to the conversion of relatively large inter-aggregate to smaller intra-aggregate pores, thereby causing a more homogeneous matrix or solid skeleton with higher strength. Overall, added gypsum plays a vital beneficial role in the strength development of the CBSC, especially for very soft clays.

Ettringite formation in lime and cement-stabilized clay

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Effect of Polycarboxylate Superplasticizers on the Growth of Ettringite in Deionized Water and Synthetic Cement Pore Solution

Investigation of the surface charge behaviour of ettringite: Influence of pH, calcium, and sulphate ions

The Influence Mechanism of Ettringite Crystals and Microstructure Characteristics on the Strength of Calcium-Based Stabilized Soil

Stabilization/solidification characteristics of organic clay contaminated by lead when using cement.

Calcium Carbonate and Ettringite Induced Efflorescence in CAC-Anhydrite Binary Systems

Stability and Decomposition Mechanism of Ettringite in Presence of Ammonium Sulfate Solution

The Semiquantitative Determination and Morphology of Ettringite in Pastes Containing Expansive Agent Cured in Elevated Temperature

Microstructure of Ettringite Binder Exposed to Natural Carbonation

Study on the Binding Behavior of Chloride Ion and Ettringite in Nano-Metakaolin Cement by Seawater Mixing and Curing Temperatures

The impact of Fe dosage on the ettringite formation during high ferrite cement hydration

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Atomic-scale investigation of physical adsorption of water molecules and aggressive ions to ettringite's surfaces

Mechanical Properties and Microstructure of Lime-Treated Red Clay

Molecular Dynamics Study on Interfacial Strengthening Mechanisms of Ettringite/Polymer Nanocomposites

Use of recycled gypsum in the cement-based stabilization of very soft clays and its micro-mechanism

On the retardation mechanisms of citric acid in ettringite-based binders

Pore Crystallization and Expansion of Cement Pastes in Sulfate Solutions with and Without Chlorides

Research on Road Characteristics and the Microscopic Mechanism of Lime–Phosphogypsum-Stabilized Red Clay

Interaction between cement clinker constituents and clay minerals and their influence on the strength of cement-based stabilized soft clay