Abstract:The rapid cleanup of endogenous CO2 has become a necessity in environmental control and life support systems (ECLSSs), to ensure crew safety and long-term task execution. The extensively used non-regenerable LiOH and soda lime adsorbents, although exhibit high CO2 storage capacities and fast kinetics, can hardly fulfill the demands of reduced launch weight and storage volume in the space-and load-limited ECLSSs. New CO2 adsorbents with desirable attributes including high CO2 uptakes, good selectivity, facile regeneration, fast adsorption and desorption kinetics, and good multicycle stability are urgently needed. We developed amine-functionalized adsorbents by loading tetraethylenepentamine (TEPA) on mesoporous supports of activated carbon (AC), aluminum oxide (AO) and silica gel (SG). The adsorbents were characterized by N-2 adsorption-desorption, thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscope (SEM) to study their microstructural properties. CO2 adsorption capacities and kinetic performance of the adsorbents with different supports and various amine loadings (10-50 wt%) were evaluated in 2%CO2 at 20 degrees C. The effects of support and amine loading on the structure-performance relationships of the adsorbents were demonstrated. The TEPA-SG-20 adsorbent (20 wt% TEPA loaded on silica gel support) exhibits the highest CO2 adsorption capacity of 1.90 mmol CO2/g and the maximum amine efficiency of 0.48 mmol CO2/mmol N. TEPA-SG-20 also exhibits fast CO2 adsorption kinetics, and the Avrami fractional order kinetic model provides a satisfactory correlation of the experimental CO2 uptakes. Furthermore, the TEPA-SG-20 adsorbent can be efficiently regenerated at 110 degrees C with a great regeneration efficacy of 97%. The desired adsorbent also exhibits good working stability with a low loss-in-capacity of 4.32% in 10 consecutive cycles. The good CO2 adsorption performance of TEPA-SG-20 is associated with the excellent microstructural properties such as high surface area, great pore volume and uniform dispersion of amine species. Overall, the desired TEPA-SG-20 adsorbent shows promise for low concentration CO2 removal in ECLSSs. (c) 2022 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.

Analysis of efficiency influencing factor of using soda lime absorbing the carbon dioxide in confined space

Calcination–carbonation Durability of Nano CaCO3 Doped with Li2SO4

Experimental Study on Oxygen Supply Performance Influence Factors of Potassium Superoxide Oxygen Board Used in Confined Space

Purification Characteristic Research of Carbon Dioxide in Mine Refuge Chamber

Removal of Low Concentration Co2 at Ambient Temperature Using Several Potassium-Based Sorbents

Study On Chemical Oxygen Source In Underground Emergency Refuge System

Experimental investigation on desulfurization of hygrolimebased on thermal balance

Experimental and Kinetics Investigations of Low-Concentration CO2 Adsorption on Several Amine-Functionalized Adsorbents

Research on Integrated CO2 Absorption-Mineralization and Regeneration of Absorbent Process

Study on the Adsorbent to the Harmful Gases in an Enclosed Space

High-efficient Cyclic Absorption of Sulfur Dioxide in Na-Mg-Ci3- Compound System for Wet Flue Gas Desulfurization

Pilot-Scale Experimental Study of a New High-Loading Absorbent for Capturing CO2 from Flue Gas

Understanding the Competition Between Carbonation and Sulfation of Li4SiO4-based Sorbents for High-Temperature CO2 Capture

An Oxygen Slow-Releasing Material and Its Application in Water Remediation As Oxygen Supplier.

Experimental study on application effect of baking soda deacidification under incineration flue gas pollution

Experimental Analysis and Evaluation on the CO2 Adsorption Performance of Modified CaO-based Adsorbents Doped with High Aluminum Cement in Different Reactors

CO2 Sorption and Reaction Kinetic Performance of K2CO3/AC in Low Temperature and CO2 Concentration

Novel Product-Adjustable Technology Using Wellman-Lord Method Coupled with Sodium-Alkali for SO2 Removal and Regeneration from Smelting Gas

Selective Desulfurization from CO_2 Via Absorption by Sodium Acetate

Potential Synergy of Chlorine and Potassium and Sodium Elements in Carbonation Enhancement of CaO-Based Sorbents

Synthesis, Experimental Studies, and Analysis of a New Calcium-Based Carbon Dioxide Absorbent