Abstract:The extraction of CO2 from ambient air, or direct air capture (DAC), is a crucial negative CO2 emissions technology with great potential for contributing to the mitigation of global warming and climate change. However, nearly all published research on DAC has been conducted under indoor temperature conditions: 20 to 30 °C. In contrast, the future global implementation requires DAC to be operational across a wide expanse of geographical areas, in which the local temperatures can vary between −30 to 50 °C. Similarly, the absolute humidity can vary from ∼0 to 84 g/m3 in various locations. Due to the massive amount of air that would be processed, it may be impractical to preheat or dehumidify the air before the CO2 separation. Therefore, it is important to develop DAC materials with good performance at realistic outdoor conditions, especially at sub-ambient conditions: −30 to 20 °C. In addition to material development, system-level studies at sub-ambient conditions are also needed for the DAC processes to reach optimal designs, which may be very different from those at ambient conditions. In this perspective article, we first assess the literature to identify the technical gaps that need to be filled for DAC to be applicable at realistic outdoor conditions. We then suggest additional research directions needed for DAC to be viable under varied conditions from the perspective of materials and system designs. For materials, we discuss the expected physical and chemical property changes for the sorbents when the temperature or humidity reaches extremes within their range, and how that will impact performance. Similarly, for system design, we indicate how varied conditions will impact performance and how these changes will impact process optimization.

The Analysis and Evaluation of Direct Air Capture Adsorbents on the Material Characterization Level

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

Research needs targeting direct air capture of carbon dioxide: Material & process performance characteristics under realistic environmental conditions

Bi-disperse Adsorption Model of the Performance of Amine Adsorbents for Direct Air Capture

A Comparative Study of Different Sorbents in the Context of Direct Air Capture (DAC): Evaluation of Key Performance Indicators and Comparisons

Analytical review of the current state of knowledge of adsorption materials and processes for direct air capture

Moisture Swing Frequency Response Method for Characterization of Ion-Transport Kinetics of Co2 Adsorption

Recent advances in direct air capture by adsorption

Direct Air Capture Technology and Its Application

Measurement of Physicochemical Properties and CO2, N2, Ar, O2, and H2O Unary Adsorption Isotherms of Purolite A110 and Lewatit VP OC 1065 for Application in Direct Air Capture

Advances in solid adsorbent materials for direct air capture of CO2

Numerical Study on a Structured Packed Adsorption Bed for Indoor Direct Air Capture

Techno-economic Analysis on Temperature Vacuum Swing Adsorption System Integrated with Pre-Dehumidification for Direct Air Capture

Recent progress on direct air capture of carbon dioxide

Temperature-vacuum Swing Adsorption for Direct Air Capture by Using Low-Grade Heat

Direct Air Capture (DAC) for Achieving Net-Zero CO2 Emissions: Advances, Applications, and Challenges

Development of sorbent materials for direct air capture of CO2

Solar-assisted Temperature Vacuum Swing Adsorption for Direct Air Capture: Effect of Relative Humidity

Research on Current and Future Aspects of Direct Air Capture of CO2

Assessing Capacity to Deploy Direct Air Capture Technology at the Country Level – An Expert and Information Entropy Comparative Analysis

From Lab to Fab: Development and Deployment of Direct Air Capture of CO2