Abstract:A track control method is proposed to solve the problem of manual steering difficulties in narrow and curved sections. The performance of a ship heading controller is affected by various factors, such as delay of the ship steering gear, external environmental disturbances, and variations in ship's speed. Firstly, a Smith optimal PID heading controller is designed. Then, a speed control method based on dichotomous method is proposed to accurately control ship speed and improve the rudder efficiency. Finally, a track control method based on model prediction and feedback compensation is proposed, considering the coupling relationship between course control and speed control. The Lantang Channel is selected as the experimental water area, and comparative simulation experiments are carried out under static water and environmental disturbance. The pre-planned route information is taken as input, and the target course at the current moment is calculated by the guidance method. The target course is used as the input of the course controller to calculate the rudder angle to control the ship's motion, and the new ship position is compared with the planned route information. The above steps are repeated to track the planned route. In order to make the ship pass the curve smoothly, the target speed of the control point is preset according to the sailing convention of decelerating first and accelerating later, and the variable speed time point and variable telegraph are solved by the dichotomy. The results are as follows: (1) The maximum track deviation and speed deviation of the Smith-OP PID are 2 m and 0.21 kn, respectively, without considering environmental interference. The maximum track deviation of the traditional PID is 8 m. (2) The maximum track deviation and speed deviation of the Smith-OP PID are 25 m and 0.27 kn, respectively, under the set environmental interference. The maximum track deviation of the traditional PID is 49 m. (3) The track control method is consistent with the practical practices of "deceleration before acceleration" and "hanging high and taking low". In , the track control method can be well applied to narrow and curved sections, and provide a theoretical basis for subsequent research on autonomous navigation and intelligent ships.

A new path tracking control algorithm of deepsea tracked miner

An Underactuated AUV Tracking Algorithm Based on Backstepping Adaptive Sliding Mode Control

Trajectory Tracking Control for Subsea Cruise and Docking of Autonomous Underwater Helicopter

Improved Line-of-sight Nonlinear Trajectory Tracking Control of Autonomous Underwater Vehicle Exposed to High Variable Speed Ocean Currents

Fuzzy Robust Path Tracking Strategy of an Active Pelagic Trawl System with Coordinated Ship and Winch Regulation

An Integrated Dynamic Model and Optimized Fuzzy Controller for Path Tracking of Deep-Sea Mining Vehicle

Research on the Depth Control Strategy of an Underwater Profiler Driven by a Mixture of Ocean Thermal Energy and Electric Energy

Research on Trajectory Planning and Tracking Algorithm of Crawler Paver

Dynamic model-based back-stepping control design for-trajectory tracking of seabed tracked vehicles

Algorithms for dynamic control of a deep-sea mining vehicle based on deep reinforcement learning

Collision Avoidance and Path Point Tracking Control for Underactuated Unmanned Surface Vehicles with Unknown Model Nonlinearity

The Adaptive Robust Tracking Control of Deep-Sea Hydraulic Manipulator Based on Backstepping Design

Parameter optimization and tractive performance evaluation of tracked miner

Nonlinear Multi-Body Dynamic Modeling and Coordinated Motion Control Simulation of Deep-Sea Mining System

The control method for ship tracking when navigating through narrow and curved sections

Trajectory tracking control of underwater tracked vehicle considering ICR longitudinal deviation compensation

PSO-NMPC control strategy based path tracking control of mining LHD (scraper)

Path Following Based on Waypoints and Real-Time Obstacle Avoidance Control of an Autonomous Underwater Vehicle

Adaptive tracking control method for shearer cutting trajectory based on the combined strategy

Guidance and Control of Underwater Hexapod Robot Based on Adaptive Sliding Mode Strategy

State-Transform MPC-SMC-Based Trajectory Tracking Control of Cross-Rudder AUV Carrying Out Underwater Searching Tasks