Abstract:If the shearer is cutting coal using the "memory cutting" technique, a manual demonstration is required.The memory cutting technology has higher requirements on the reserving conditions of coal seams.When the coal seam fluctuates greatly, frequent manual demonstrations are required.The "memory cutting" technology only optimizes the cutting path of the coal seam roof for the next cutting.Along the advancing direction of the shearer, it is impossible to accurately plan and control the pitching angle of the shearer according to the reserving conditions of the coal seam.Based on the concept of shearer self-adaptive intelligent cutting, this paper designs the operation mode of the shearer intelligent cutting system in the fully mechanized working face.In this model, the high-precision three-dimensional geological model of the working face is first constructed by using the highly accurate geophysical data of the coal seam, and then the future cutting path of the shearer is planned by using the model.At the same time, the high-precision three-dimensional geological model is dynamically corrected by using the latest geological data of the working face during the mining process.In this paper, the high-precision three-dimensional dynamic geological model is coupled with the shearer mining planning algorithm.According to the model, a shearer mining control baseline planning algorithm that can adapt to the changes of the coal seam is proposed, which realizes the pitching control of the shearer in the advancing direction and the cutting control in the pulling direction, as well as the efficient cooperation between the update of the geological model, the planning of the mining baseline and the adjustment of the shearer drum.The calculation service interface of the drum adjustment parameters in the intelligent cutting system and the communication protocol between the intelligent cutting system is designed.Addtionally, the shearer control system is considered.This realizes the precise control of the shearer drum based on the planning cutting path.The intelligent cutting system of fully mechanized working face is applied to guide the production of shearers.The practice shows that the shearer intelligent cutting system is suitable for coal seams with various degrees of floor inclination.The cutting line of the shearer can better fit the roof and floor lines of the coal seam, which can save resources and improve production efficiency.

Adaptive tracking control method for shearer cutting trajectory based on the combined strategy

Trajectory Tracking Control in Horizontal Direction of Open-type Hard Rock Tunnel Boring Machine Based on Adaptive Robust Control Strategy

Indirect Adaptive Robust Trajectory Tracking Control of Hard Rock TBM with Load Variation of Tunneling Face

Control Strategy of Hybrid Excavator Based on Condition Recognition and Hybridization Optimization

Adaptive Sliding Mode Control for Tunnel Boring Machine Cutterhead Telescopic System with Uncertainties.

Precision Versus Intelligence: Autonomous Supporting Pressure Balance Control for Slurry Shield Tunnel Boring Machines

Pose and trajectory control of shield tunneling machine in complicated stratum

A Novel Emergency Braking Control Strategy for Dual-Motor Electric Drive Tracked Vehicles Based on Regenerative Braking

Research into the intelligent control of the cutter head drive system in Shield tunnelling machine based on the pattern recognition

An Effective Method for Longwall Automation in Thin Coal Seam.

A novel cutterhead cascade control strategy for hybrid-driving tunnel boring machines

State recognition based adaptive cutting method for roadheader

A Digital Twin-Based Adaptive Height Control for a Shearer

Multiparameter Control Strategy and Method for Cutting Arm of Roadheader

Pre-Work for the Birth of Driver-Less Scraper (LHD) in the Underground Mine: The Path Tracking Control Based on an LQR Controller and Algorithms Comparison

An Optimal Algorithm for Planning Shearer Trailing Drum Cutting Path

PSO-NMPC control strategy based path tracking control of mining LHD (scraper)

Adaptive intelligent cutting technology of the shearer based on the high-precision three-dimensional dynamic geological model

Optimal tracking control of the coal mining face fluid supply system via adaptive dynamic programming

Application of an Automated Top Coal Caving Control System: The Case of Wangjialing Coal Mine

Prescribed performance dynamic surface control based on dual extended state observer for 2-dof hydraulic cutting arm