Effects of coolant side boundary condition on analytical transpiration cooling solutions

熊宴斌,姜培学,祝银海,黄拯，刘元清

DOI: https://doi.org/10.16511/j.cnki.qhdxxb.2013.10.021

2013-01-01

Abstract:Analytical solutions for the temperature distributions in the porous media zone in transpiration cooling were developed using the local thermal non-equilibrium model. Three different boundary condition models were used for the coolant entrance side of the porous media wall. The results show that the solid and fluid temperatures are lower for the isothermal with insulation boundary near the coolant side entrance, while the solid and fluid temperatures are lower through the porous wall for the isothermal boundary with convection heat transfer at the back side. The effects of the dimensionless parameters on the results were analyzed for different boundary conditions. Increasing the dimensionless coolant mass flow rate and Biot number resulted in results for the isothermal boundary condition at the coolant side closer to the results calculated without the temperature assumption. The conditions when the local thermal equilibrium model could be used were discussed with a defining equation. The dimensionless solid and fluid temperature difference increases with increasing coolant mass flow rate or decreasing Biot number, which makes the local thermal equilibrium model inapplicable.