Numerical Simulation for Turbulent Transpiration Cooling Processes

余磊,姜培学,任泽霈

DOI: https://doi.org/10.3321/j.issn:1000-0054.2003.12.024

2003-01-01

Abstract:The turbulent flow and heat transfer characteristics in a rectangular channel with and without transpiration cooling were analyzed numerically to verify the turbulent two-equation model for flows with transpiration cooling. The two-layer k-e model in PHOENICS 3.3 was used to calculate the turbulent velocity and temperature distributions for the main flow. The calculation results show that transpiration cooling greatly increases the boundary layer thickness and reduces the wall friction coefficient. The main flow velocity perpendicular to the wall is also increased. Both the wall temperature and the convection heat transfer coefficient decrease sharply with increasing cooling flow rate. For a blowing ratio of 1%, the wall temperature along the transpiration cooling wall was reduced by about 20% and the convection heat transfer coefficient and average wall friction coefficient were reduced by about 50%. The numerical results agree well with known correlations with errors of less than 10% when the blowing ratio was less than 2%.