Abstract:In the present paper, a new simulation method is developed for unsteady cavitating flow with air ventilation, which is very useful for alleviating the pressure oscillation in hydroturbine draft tube and reducing the drag force on an underwater vehicle. Because the fluid includes three components, i.e., the water, vapor, and air, the interactions between water–air and water–vapor are treated by applying the level set method, and the effect of surface tension is taken into account in governing equations. Further, the phase change between the water and the vapor is modeled by a homogeneous model, where the effect of air injection is considered by applying the air volume fraction in the mass transport equation. For calibration, the cavitating flows around a cylinder vehicle were simulated using the proposed method, and the numerical results were compared with the experimental data at three different ventilation conditions. The good agreement of cavitation evolutions between the simulation and the experiment indicated that the proposed method was acceptable for the simulation of ventilated cavitating flows with nature cavitation and would be usable for various engineering applications. Moreover, the vorticity analysis depicts that the vortex is closely related to cavitation evolution, and air injection much changes the vorticity production in cavitating flow. It was also revealed that vorticities only occurred in regions with high vapor/air volume fraction and the vortex stretching term created the most vorticities.

Some factors affecting lift force of air cushion vehicle in numerical simulation

Numerical Forecasting And Experiment Research Of The Air Flow Rate For The Air Cushion Vehicle

Road-friendliness of interconnected hydro-pneumatic suspension based on ADAMS/Simulink/AMESim

Study on Dynamic Pressure Effect of Gas Bearings in Fuel Cell Vehicles

Research on air cushion suspension support system with low speed and heavy load

Numerical Investigation of Microbubble Drag Reduction on an Axisymmetric Body Based on Eulerian Multiphase Model

Numerical And Experimental Study On Air Cushion System Dynamics For Semi-Track Air-Cushion Vehicle

Numerical Investigation of Air Cushion Effects on Low Filling Sloshing Impacts

Numerical Study on the Control Mechanism of Cloud Cavitation by Obstacles

Analysis of Air Cushion Vehicle's Seaworthiness and Sensitive Parameters

Research on the Transverse Stability of an Air Cushion Vehicle Hovering over the Rigid Ground

A Contribution to Study on the Lift of Ventilated Supercavitating Vehicle With Low Froude Number

Analysis of Underwater Radiation Sound Power of Air Cushion Vehicle under Cushion Pressure

Investigating the Effect of Geometric Shape on Air Cushion Lift Force

Numerical Simulation on Lift of Aft Section of Supercavitating Bodies Based on Homogeneous Multiphase Model

Analysis of Ventilated Cavitation Around A Cylinder Vehicle with Nature Cavitation Using A New Simulation Method

Numerical Investigation on Pressure Responsiveness Properties of the Skirt-Cushion System of an Air Cushion Vehicle

Numerical Analysis of the Water Entry of Flexible Bags of Air Cushion Vehicles Considering a Diaphragm

Simulation Analysis on the Role of Air Cushion in the Slamming of a Flat-Bottom Structure

Numerical Study of Section Geometry of Flexible Bag of Air Cushion Vehicle Subjected to Slamming Loads

Calculation of Skirt Tension for Air Cushion Vehicle Based on Vector Form Intrinsic Finite Element