Abstract:In the semiconductor industry supply chain, there are complex processing steps from wafer to chip. Rapid Thermal Processing (RTP) is one of the key technologies, using lasers or high-temperature lamps to rapidly heat the wafer to over 1000°C for several seconds. This technique can produce high-quality silicides and oxides on the wafer while reducing the thermal budget in terms of temperature and time. RTP systems must be able to change the spatial energy distribution radiated onto the wafer to maintain temperature uniformity under different processing conditions, including varying gases, pressures, and wafer structures. However, the non-equilibrium conditions in RTP make modeling and prediction challenging, with temperature coupling issues in different wafer regions. This paper models the wafer heating system as a 5th-order time-delayed first-order inertia matrix and proposes a corresponding feedforward decoupling method. Traditional incremental PID control, when ramping up temperatures above 1000°C, leads to prolonged oscillations near the target temperature due to temperature coupling between regions, resulting in slow temperature convergence. The method proposed in this paper can effectively eliminate inter-regional coupling effects, unify PID parameters for better determination, and deploy them in practical RTP systems. Experimental results demonstrate that temperature convergence can be achieved rapidly, enhancing system heating efficiency. This study provides an effective solution to temperature control issues in wafer processing, with important practical implications for the semiconductor equipment manufacturing industry.

Multivariable Inverse Decoupling Pid Control for the Flatness and Thickness of 4-High Aluminum Cold Rolling Mill

Decoupling Control Design and Simulation of Aluminum Alloy Pulsed MIG Welding Based on Dynamic PLS Framework

Intelligent decoupling control for thickness and tension system of tandem cold rolling mill

A MIMO Decoupling Algorithm for Rapid Heating Systems of Wafers

Immersion and invariance adaptive decentralized control for the speed and tension system of the reversible cold strip rolling mill

Two-Degree-of-Freedom Control for Active Magnetic Bearing Flywheel Rotor System Based on Inverse System Decoupling

Multi-variable PID Neural Network Decoupling Algorithm in Scrap Copper Smelting Process Control

Feedforward Decoupling Control for Rigid Rotor System of Active Magnetically Suspended High‐speed Motors

Active Disturbance Rejection Control for Hydraulic Width Control System for Rough Mill

Novel Decoupling Control and Eigenstructure Assignment Strategies for Rigid Active Magnetic Bearing Rotor System

Modal decoupling control for active magnetic bearing-supported flywheel rotor system

Elongation Control of the Ultra-Thin Tinplate During Two-Stand Temper Rolling Unsteady Process

Data-Based Iterative Dynamic Decoupling Control for Precision MIMO Motion Systems.

Research and Analysis of Robust Decoupling Control of Hydraulic Looper System

MULTIVARIABLE ADAPTIVE DECOUPLING CONTROLLER FOR VERTICAL LOOP OF CONTINUOUS BAR MILL

Vibration of Flexible Rotor Systems with Two-Degree-Of-Freedom Pid Controller of Active Magnetic Bearings

Block Discouple Control of Cross-Directional Basis Weight on Paper Machines*

Adjoint Transfer Matrix Based Decoupling Control for Multivariable Processes

Analytical Design of PID Decoupling Control for TITO Processes with Time Delays

Research on Dynamic Response of Cold Rolling Mill with Dynamic Stiffness Compensation

Auto-learning Dynamic Decoupling Control of Multivariable System