Abstract:The stiffness of a spindle at high speeds has a significant effect on the quality of the cutting surface and the machining accuracy. However, the spindle stiffness is difficult to be detected directly when the spindle is rotating, and the measured stiffness values are usually coupled with other parts of the spindle–tool system (such as toolholder, spindle–toolholder joint, tool). This paper presents a comprehensive method to deal with the stiffness modeling, identification, and measuring of a rotating spindle. Based on the deflection equation and the principle of superposition, the stiffness model is derived, for a spindle–tool system including a spindle, a specially manufactured toolholder, and a spindle–toolholder joint. A three-step identification algorithm is proposed to decouple and identify the actual spindle stiffness value. First, when the spindle is static, the stiffness values of the shaft, toolholder, and joint are obtained by using the least-squares method. Second, when the spindle is rotating, the stiffness values of the rear bearings and front bearings are identified based on the spindle error analysis method. Third, the stiffness values of the spindle under different rotating conditions are calculated based on the identification results from the previous two steps. Furthermore, the stiffness model and identification algorithm are verified experimentally on an instrumented spindle. The static stiffness value of the same spindle is also measured and compared with the stiffness value under rotating conditions subsequently. This work is useful and can be utilized as a guide for spindle stiffness testing and spindle performance evaluation to spindle manufacturers.

A new orthotropic model for the stiffness of machine tool joints

End Stiffness Modeling for Automatic Horizontal Dual-Machine Cooperative Drilling and Riveting System

Stiffness-oriented Posture Optimization in Robotic Machining Applications

On obtaining machine tool joints stiffness by integrated modal analysis

Kinematic Modeling and Inverse Kinematics Solution of a New Six-Axis Machine Tool for Oval Hole Drilling in Aircraft Wing Assembly

Characterizing machine tool spatial stiffness and predicting accuracy

Stiffness Analysis of Gantry Hybrid Machine Tools

Static stiffness research of a hybrid machine tool based on the element stiffness matrix

Stiffness Modeling Approach for a 3-DOF Parallel Manipulator with Consideration of Nonlinear Joint Stiffness

Stiffness Optimization of a Heavy Hybrid Machine Tool Named XNZH2430

Static Stiffness Tuning Method of Rotational Joint of Machining Center

A virtual material-based static modeling and parameter identification method for a BT40 spindle–holder taper joint

STIFFNESS ANALYSIS AND DESIGN OF 2-DOF PLANAR PARALLEL MANIPULATOR

Research on the Stiffness Performance for Robot Machining Systems

Stiffness Analysis and Optimization of a Hybrid Machine Tool Based on the Stiffness Matrix

Stiffness Analysis of Machine Tools Using Finite Element Method

STATIC STIFFNESS RESEARCH AND OPTIMIZATION ON A HYBRID MACHINE TOOL CONSIDERING THE STIFFNESSES OF BEARINGS AND GUIDEWAYS

Variable Stiffness Identification and Configuration Optimization of Industrial Robots for Machining Tasks

Analysis of Dynamic Characteristics for Machine Tools Based on Dynamic Stiffness Sensitivity

An Axial Semi-Rigid Connection Model for Cross-Type Transverse Branch Plate-to-chs Joints

Stiffness Modeling, Identification, and Measuring of a Rotating Spindle