Abstract:The development of wearable devices and remote sensor networks progressively relies on their increased power autonomy, which can be further expanded by replacing conventional power sources, characterized by limited lifetimes, with energy harvesting systems. Due to its pervasiveness, kinetic energy is considered as one of the most promising energy forms, especially when combined with the simple and scalable piezoelectric approach. The integration of piezoelectric energy harvesters, generally in the form of bimorph cantilevers, with wearable and remote sensors, highlighted a drawback of such a configuration, i.e., their narrow operating bandwidth. In order to overcome this disadvantage while maximizing power outputs, optimized cantilever geometries, developed using the design of experiments approach, are analysed and combined in this work with frequency up-conversion excitation that allows converting random kinetic ambient motion into a periodical excitation of the harvester. The developed optimised designs, all with the same harvesters' footprint area of 23 × 15 mm, are thoroughly analysed via coupled harmonic and transient numerical analyses, along with the mostly neglected strength analyses. The models are validated experimentally via innovative experimental setups. The thus-proposed ϕ = 50 mm watch-like prototype allows, by using a rotating flywheel, the collection of low-frequency (ca. 1 to 3 Hz) human kinetic energy, and the periodic excitation of the optimized harvesters that, oscillating at their eigenfrequencies (~325 to ~930 Hz), display specific power outputs improved by up to 5.5 times, when compared to a conventional rectangular form, with maximal power outputs of up to >130 mW and average power outputs of up to >3 mW. These power levels should amply satisfy the requirements of factual wearable medical systems, while providing also an adaptability to accommodate several diverse sensors. All of this creates the preconditions for the development of novel autonomous wearable devices aimed not only at sensor networks for remote patient monitoring and telemedicine, but, potentially, also for IoT and structural health monitoring.

Modeling and Experimental Investigation of an Impact-Driven Piezoelectric Energy Harvester from Human Motion

A piezoelectric human motion energy harvester with stress amplification mechanism

Scavenging energy from human walking through a shoe-mounted piezoelectric harvester

A Non-Resonant Piezoelectric–Electromagnetic–Triboelectric Hybrid Energy Harvester for Low-Frequency Human Motions

Optimization of an Impact-Based Frequency Up-Converted Piezoelectric Vibration Energy Harvester for Wearable Devices

The Analysis and Design of a High Efficiency Piezoelectric Harvesting Floor with Impacting Force Mechanism

A Pavement Piezoelectric Energy Harvester for Small Input Displacements

A Piezoelectric Energy Harvester for Human Body Motion Subjected to Two Different Transversal Reciprocating Excitations

Ultralow-Frequency Biomechanical Energy Scavenging and Human Activity Recognition at Different Positions Using a Multifunctional Wearable Energy Harvester

Dynamic Modeling and Experimental Validation of an Impact-Driven Piezoelectric Energy Harvester in Magnetic Field

A novel dual piezoelectric-electromagnetic energy harvester employing up-conversion technology for the capture of ultra-low-frequency human motion

Biomechanical Energy Harvesting: Effects of Orientations on Efficiency of Energy Harvesting from Heart Motion Using Ultrathin Flexible Piezoelectric Devices (Adv. Theory Simul. 7/2019)

Theory of energy harvesting from heartbeat including the effects of pleural cavity and respiration.

Design and experimental investigation of a positive feedback magnetic-coupled piezoelectric energy harvester

A hybrid piezoelectric-electromagnetic body energy harvester: Design and experiment validation

Enhancing the Bandwidth and Energy Production of Piezoelectric Energy Harvester Using Novel Multimode Bent Branched Beam Design for Human Motion Application

An Optimized Energy Harvester for Moving Mass Induced Vibration

Shape optimization of a non-uniform piezoelectric bending beam for human knee energy harvester

Multimodal Hybrid Piezoelectric-Electromagnetic Insole Energy Harvester Using PVDF Generators

Wearable Energy Harvesters Generating Electricity from Low-Frequency Human Limb Movement

Experimental Characterization of Optimized Piezoelectric Energy Harvesters for Wearable Sensor Networks