Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Control structure selection for vapor compression refrigeration cycle

Design of Self-Tuning SISO Partial-Form Model-Free Adaptive Controller for Vapor-Compression Refrigeration System

Optimal Control Structure Selection Based on Economics for Continuous Cross-Flow Grain Dryer

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

A Comparative Study on Regulation Methods for Transcritical CO2 Ejector Expansion Refrigeration System.

Performance evaluation on an internal auto-cascade refrigeration cycle with mixture refrigerant R290/R600a

Performance Analysis of a Modified Zeotropic Mixture (R290/R600) Refrigeration Cycle with Internal Subcooler for Freezer Applications

On-off Timing Computer Control System for Valved Refrigerator

Performance Evaluation of a Modified Refrigeration Cycle with Parallel Compression for Refrigerator-Freezer Applications

Theoretical Study on a Modified Single‐stage Autocascade Refrigeration Cycle with Auxiliary Phase Separator

Comparison of control strategies for the temperature control of a refrigeration system based on vapor compression

Integrated product selection and process optimization for cascade refrigeration system

Adaptive control for refrigeration via online identification

Multimode operation control strategy for improving part-load performance of supercritical CO 2 Brayton cycle

A Study On A New Auto-Cascade Refrigerating Cycle

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Theoretical investigation on an ejector–expansion refrigeration cycle using zeotropic mixture R290/R600a for applications in domestic refrigerator/freezers

Optimal control analysis and Practical NMPC applied to refrigeration systems

Superstructure-Based Optimization of Vapor Compression-Absorption Cascade Refrigeration Systems

Model predictive control for the ice-storage air-conditioning system coupled with multi-objective optimization

One-dimensional optimisation design and off-design operation strategy of centrifugal compressor for supercritical carbon dioxide Brayton cycle