Abstract:Dielectric elastomers (DEs) are actuatable under an electric field, whose large strain and fast response speed compare favorably with natural muscles. However, the actuation of DE-based devices is generally limited to a single mode and cannot be reconfigured after fabrication, which pales in comparison to biological counterparts given the ability to alter actuation modes according to external conditions. To address this, liquid crystal dielectric elastomers (LC-DEs) that can alter the dielectric actuation modes based on the thermally triggered shape-changing are prepared. Specifically, the two shapes through the LC phase transition possess different bending stiffness, which leads to distinct actuation modes after an electric field is applied. Moreover, the two shapes can be individually programmed/reprogrammed, that is, the one before the transition is regulated through force-directed solvent evaporation and the one after the transition is via bond exchange-enabled stress relaxation. As such, the multimodal dielectric actuation behaviors upon temperature change can be readily diversified. Meanwhile, the space charge mechanism endows LC-DEs with the significantly reduced driving e-field (8 V mu m-1) and bidirectional actuation manners. It is believed this unique adaptivity in the actuation modes under a low electric field shall offer versatile designs for practical soft robots. Multiple electric actuation modes can be achieved in a single liquid crystal dielectric elastomer based on its reversible shape changing between the permanent and temporary shape. The independent programmability of these two shapes offers high freedom to fabricate multimodal dielectric actuators with designable actions, which can be triggered at a low electric field due to the space charge mechanism.image

A rotary joint based on dielectric elastomer

Spatially Modulus-Patterned dielectric elastomer actuators with oriented electroactuation

Self-healing High-performance Dielectric Elastomer Actuator with Novel Liquid-solid Interpenetrating Structure

Tunable Actuation of Dielectric Elastomer by Electromechanical Loading Rates

Investigation of the State Transition and Moving Boundary in a Pneumatic–Hydraulic Coupled Dielectric Elastomer Actuator

Model-Based Nonlinear Control of the Dielectric Elastomer Actuator with High Robustness and Precision

Design of Facile Dielectric Elastomer-Based Bending Module for Soft Robotics Applications

Bistable rotating mechanism based on dielectric elastomer actuator

A Multi-electrode Electroelastomer Cylindrical Actuator for Multimodal Locomotion and Its Modeling

Research on a Biomimetic Flexible Ball Joint With Variable Stiffness for Robots

Design and Simulation of a 3-DOF Dexterous Joint Actuator Based on Multi-Drive Hierarchical Output and Spherical Rotation Mechanism

Repeatedly Programmable Liquid Crystal Dielectric Elastomer with Multimodal Actuation.

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

Tunable electromechanical properties of double-layer stacked anisotropic dielectric elastomer actuators

Soft Two-Degree-of-Freedom Dielectric Elastomer Position Sensor Exhibiting Linear Behavior

Development of modular multi-degree-of-freedom hybrid joints and robotic flexible legs via fluidic elastomer actuators

Research on a multi-degree-of-freedom ultrasonic motor and the holding mechanisim of the rotor

Muscle-inspired soft robots based on bilateral dielectric elastomer actuators

Mechanical design and position-tracking control of a novel robotic joint with a circular rotary electro-hydraulic actuator

Design and development of a 3-DoF robotic wrist joint with tension amplification mechanism

An Anthropomorphic Musculoskeletal System with Soft Joint and Multifilament Pneumatic Artificial Muscles