Abstract:Optimal design of tuned mass damper (TMD) parameters should be implemented before device installation to achieve the desired vibration reduction effects for tall and quite slender buildings. Although various optimization algorithms have been developed for searching TMD parameters, there has been very limited exploration of machine learning-based optimization approach in this domain. In this paper, two machine learning-based algorithms are proposed to optimize the natural frequency and damping ratio of a TMD device for seismically excited building. The first algorithm investigates the single-objective optimization of a TMD parameters on a linear building structure. It is based on physics-enhanced generative and adversarial network (GAN) architecture. A generative network randomly generates the primary TMD parameters within the specified parameter ranges, while an adversarial network guides the evolution of parameters to acquire updated parameters, a physical evaluation network assesses the performance of the updated and primary parameters, subsequently providing training data for both the generated network and adversarial network. Furthermore, a second physics-enhanced machine learning algorithm is proposed for the multi-objective optimization of a TMD parameters on a nonlinear building structure under various seismic excitations. The physical evaluation network is extended to consider multiple objective functions, in which the multiple objective functions are integrated through a kind of decomposition scheme, i.e., weighted sum approach. Then, a better set of parameters can be determined and a Pareto optimal solution is obtained. To verify the effectiveness of the two proposed algorithms, single-objective optimization of a TMD parameters for a linear shear-type structure under seismic excitation and a multiple-objectives optimization of a TMD parameters for a seismically excited nonlinear moment-resisting frame (MRF) are conducted and the optimizations are validated by comparing with those by the conventional particle swarm optimization (PSO) approach.

Joint Optimization Approach to Building Vibration Control Via Multiple Active Tuned Mass Dampers

Simultaneous Optimization of Damper Parameters and Controllers for Building Vibration Attenuation over Finite Frequency Band

Tuned Mass Damper Parameters Design for Structural Systems Via Linear Matrix Inequality and Genetic Algorithm

Multi-objective optimization and seismic performance verification of multiple tuned impact dampers for nonlinear benchmark building

Stochastic Optimal Control of Wind-Excited Tall Buildings Using Semi-Active Mr-Tlcds

H2 norm based parameter optimization of multiple tuned mass dampers for resonance suppression

Adaptive vibration control of a flexible structure based on hybrid learning controlled active mass damping

Parameter Optimization Of Multi-Tmds For Wind-Excited Vibration Suppression Of Tall Buildings

Optimal Design of Multiple Tuned Mass Dampers for Vibration Control of a Cable-Supported Roof

Multi-objective optimal design of Tuned Mass Damper Inerter for base isolated structures

Integrated Structural Optimization and Vibration Control for Improving Wind-induced Dynamic Performance of Tall Buildings

Human-Induced Vibration Control of Floor Structures Using MTMD System Optimized by MATLAB-SAP2000 Interface

Physics-enhanced machine learning-based optimization of tuned mass damper parameters for seismically-excited buildings

Actuators and Sensors Allocation for Adjacent Buildings Vibration Control

Seismic control of tall buildings using vertically distributed multiple tuned mass dampers

Seismic response control of adjacent buildings coupled by semi-active shared TMD

Design method of tuned mass damper by LMI based robust control theory for seismic excitation

Design method for wind-induced vibration control of high-rise buildings with hybrid tuned mass dampers

Integrated Control for Multi-Modal Floor Vibration under Human Walking

Joint Control of Multiple Adaptive Tuned Vibration Absorbers Based on Magnetorheological Elastomers

Semi-Active Control for Benchmark Building Using Innovative TMD with MRE Isolators