Abstract:Most existing buildings are not equipped with long-term monitoring system. For the structural model updating and damage detection of this type of structures, ambient vibration test is popular as artificial excitation is not required. This article presents in detail the full-scale ambient vibration test, operational modal analysis, and model updating of a tall building. To capture the dynamic properties of the target 20-story building with limited number of sensors, a 15-setup ambient vibration test was designed to cover at least three measurement points (each consists of a vertical and two orthogonal horizontal measured degrees of freedom) for each selected floor. The modal parameters of each setup were extracted from the measured acceleration signals using a frequency domain decomposition method and were combined to form the global mode shape through the least-squares method. Due to the regularity of the building, a simple class of shear building models was employed to capture the dynamic characteristics of the building under lateral vibration. The identified modal parameters of the building were employed for the model updating of the shear building model to identify the distribution of inter-story stiffness. Since the “amount” of the measured information is small when compared to the “amount” of required information for identifying the uncertain parameters, the model updating problem is unidentifiable. To handle this problem, the Markov chain Monte Carlo–based Bayesian model updating method is employed in this study. The identified modal parameters revealed interesting features about the dynamic properties of the building. The well-matched results between model-predicted and identified modal parameters show the validity of the shear building model in this case study. This study provides valuable experience in the area of structural model updating and structural health monitoring.

Actuators and Sensors Allocation for Adjacent Buildings Vibration Control

Optimal placements of actuators in vibration active control for double-layer spherical grid shell structures

Active Vibration Control Analysis of Spatial Structures by State-Derivative Feedback Algorithm

Feedback Control Optimization for Seismically Excited Buildings

Seismic Response Mitigation of Adjacent High-Rise Structures Via Stochastic Optimal Coupling-Control

Enhancing the Seismic Performance of Adjacent Building Structures Based on TVMD and NSAD

RANDOM SEISMIC RESPONSE ANALYSIS OF ADJACENT BUILDINGS COUPLED WITH NON-LINEAR HYSTERETIC DAMPERS

Integrated Robust H_∞ Control and Optimal Placement of Actuators for Building Structure

Stochastic optimal coupling-control of adjacent building structures

STOCHASTIC OPTIMAL CONTROL OF ADJACENT COUPLED TALL BUILDINGS UNDER SEISMIC EXCITATION

Parameter optimization of vibration control system for adjacent building structures based on negative stiffness inerter damper

Seismic response control of adjacent buildings coupled by semi-active shared TMD

Exact solution of free vibration of adjacent buildings interconnected by visco-elastic dampers

Algorithm for Optimal Design of Adjacent Buildings Connected by Fluid Viscous Devices

Vibration Control of Plates Using Discretely Distributed Piezoelectric Quasi-Modal Actuators/sensors

Bayesian model updating of a 20-story office building utilizing operational modal analysis results

Semi-active seismic control of an 11-DOF building model with TMD+MR damper using type-1 and -2 fuzzy algorithms

Variable Fractional Order Sliding Mode Control for Seismic Vibration Suppression of Uncertain Building Structure

Pole Allocation Applied to Two Buildings Connected by Joint Damper

An optimal sensor/actuator placement method for flexible structures considering spatially varying disturbances

Variable fractional order sliding mode control for seismic vibration suppression of building structure