Abstract:Supplemental damping devices, including passive, semiactive, and active systems, can be employed to reduce vibrations caused by various hazards. This paper examined tuned liquid column dampers (TLCDs), a specialized type of tuned mass damper typically used to reduce the response of the structure around a specific frequency. A variation of the tuned liquid damper previously studied by the authors is a tuned liquid wall damper (TLWD), in which multiple liquid columns are embedded within a RC shear wall. The TLWD eliminates the space requirement of a conventional tuned liquid damper by distributing the liquid mass vertically into multiple columns throughout the structural shear wall system, and enables reaching a higher frequency range through the design of the TLWD geometries. This study investigated the optimal design of TLWD systems to mitigate multiple hazards, in particular nonsimultaneous wind and seismic hazards, based on a life-cycle cost (LCC) objective function. This was done using a probabilistic life-cycle analysis procedure that leveraged Bayesian optimization (BO) to search for the most promising permutation of tuning parameters that minimize the LCC under the design loads, with Monte Carlo simulations used to propagate the record-to-record variability of wind and seismic hazards. The proposed procedure was demonstrated on a 20- and a 42-story building subjected to nonsimultaneous wind and seismic excitations. The vertically distributed TLWDs were subjected to geometric constraints provided by the wall systems, and tuned to multiple frequencies enabling multimode mitigation. Afterward, the optimal tuning parameters were identified using the LCC-BO algorithm. Results showed that the multimode TLWD tuned with optimal tuning parameters effectively mitigated both wind and seismic hazards, leading to 32.8% and 43% total LCC reduction for the 20- and 42-story buildings, respectively, compared with the buildings without dampers, excluding the cost of the mitigation system. A performance comparison with a traditional tuned liquid column damper (TLCD) installed at the top of the buildings demonstrated that the multimode TLWD system outperformed the TLCD with an approximate 9% reduction in LCC for both the 20- and 42-story buildings.

Algorithm for Optimal Design of Adjacent Buildings Connected by Fluid Viscous Devices

Algorithm for Design of Controlled Motion of Adjacent Structures

RANDOM SEISMIC RESPONSE ANALYSIS OF ADJACENT BUILDINGS COUPLED WITH NON-LINEAR HYSTERETIC DAMPERS

Noniterative Optimization Procedure for Seismic Weakening and Damping of Inelastic Structures

Mitigating the seismic pounding of multi-story buildings in series using linear and nonlinear fluid viscous dampers

Seismic Response of Adjacent Buildings Connected by Nonlinear Viscous Dampers

Design of Passive Systems for Control of Inelastic Structures

Fail-safe optimization of viscous dampers for seismic retrofitting

Seismic Response Mitigation of Adjacent High-Rise Structures Via Stochastic Optimal Coupling-Control

Optimal softening and damping design for buildings

Optimal application of fluid viscous dampers in tall buildings incorporating integrated damping systems

Evolutionary seismic design optimization of mega‐brace damper architectures in three‐dimensional structures

Multi-disciplinary performance comparison for selecting the optimal sustainable design of buildings structures with fluid-viscous dampers

Optimal Design of Viscoelastic Dampers in Frame Structures Considering Soil-Structure Interaction Effect

Editorial: Smart Passive Damper Design for Building Structures with Higher Resilience under Uncertain Earthquake Ground Motions

Seismic performance of building structures based on improved viscous damper seismic design

Parameter optimization of vibration control system for adjacent building structures based on negative stiffness inerter damper

Optimizing Viscous Damper Placement for Stochastic Performance of Buildings with Plan Asymmetry

Risk-Informed Design Optimization of Vertically Distributed Tuned Liquid Wall Dampers for Multihazard Mitigation

Seismic resilient design and negative stiffness-assisted nonlinear isolation system for adjacent non-coaxial buildings linked by corridors

Stochastic optimal coupling-control of adjacent building structures