Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. Head injury is the primary cause of serious lesions or death in automobile accidents. During crash tests, the mass and centre-of-mass position of the head of anthropometric test devices are crucial factors determining the accuracy of head injury test data. However, owing to the irregular shape as well as complex structure and material composition of the head of dummies, problems such as uneven mass distribution easily occur, resulting in deviations between the actual and designed positions of the centre-of-mass of the head. This study conducted research on head impact biomechanics and the centre-of-mass adjustment method for the head of dummies. Specifically, the biomimetic mechanical equivalent of the head was investigated, and head impact mechanics were analysed. Then, a predictive model was established for head drop mechanical response; the accuracy of this model was verified through head drop experiments. Based on the model, the law of centre-of-mass influence on the mechanical response of the dummy head was investigated, yielding an evaluation method for the different mechanical responses of the head. Using the rotational centre-of-mass measurement method, the mass and centre-of-mass position of the head were obtained. The distributed centre-of-mass adjustment method based on the principle of torque equilibrium was utilized to solve the deviations in the centre-of-mass position, the geometric dimensions of the counterweights and the centre-of-mass itself. Two counterweights were distributed on both sides of the internal cavity wall of the dummy head, resolving the positioning issue of the counterweights in the head cavity. The rationality of the centre-of-mass adjustment results was analysed using the predictive model for head impact mechanical response. The analysis results indicate that the centre-of-mass-adjusted dummy head better aligned with the mechanical response of the head in real collision scenarios, providing a new approach for the adjustment of the centre-of-mass of the head of dummies.

Design and validation of a dummy neck pendulum test fixture

Development of tower crane model dead-load test device in structural design competition

Development and Validation of a Finite Element Model of Human Cervical Spine Based on the Head-Neck Drop Test

An Adaptive Posture Following and Keeping Fixture and Experiments

The Design Study of Single Plane Vertical Hard Bearing Dynamic Balancing Machine

An Adaptive Posture Following and Keeping Fixture Based on Aerostatic Bearing and Universal Ball Joint for Aircraft Digital Assembly

Posture Alignment and Joining Test System for Large Aircraft Fuselages

Research on Neck Calibration of HⅢ 50th Male Dummy in Frontal Impact Test

An Automatic Three-Dimensional Loading Apparatus for Static Tests of Truss Joints

An assembly system for inertial pendulum components in miniature wire suspended pendulum accelerometers

A Novel Method For The Micro-Clearance Measurement Of A Precision Spherical Joint Based On A Spherical Differential Capacitive Sensor

Research on the centre-of-mass adjustment method for the head of an anthropometric test device based on a head impact biomechanics model

Three-dimensional finite element modelling of the torso of the anthropomorphic test device THOR

Optimization of 3D Tolerance Design Based on Cost–Quality–Sensitivity Analysis to the Deviation Domain

A Novel Calibration System For A Space Manipulator

Analysis on Modeling Methods of Pedestrian Headform Impactor and Calibration Test

IMPROVEMENT OF EXPERIMENTAL IDENTIFICATION METHOD WITH TRIFILAR TORSIONAL PENDULUM FOR INERTIA PROPERTIES OF LARGE-SCALE RIGID-BODY

Accuracy Analysis and Calibration of a Special 3-DOF Parallel Mechanism

Multi-Parameter Based Calibration of Long-Link Flexible Manipulators

An Improved Analytical Model of a Thrust Stand with a Flexure Hinge Structure Considering Stiffness Drift and Rotation Center Offset

Design Optimization of Compound Pendulum System for Measurement of Micro Thrust