Abstract:Kinematic calibration has been widely employed for manipulators to promote their performance characteristics. For a dual-arm manipulator, most of the research attentions are paid to improving the absolute positioning accuracy. However, collaborative accuracy plays a critical role in mutual operations between the two arms. For example, in dangerous chemical experiments, the dual-arm manipulator is often demanded to grab a target object with the two hands, or re-grasp a test tube from one hand to the other, where the inferior collaborative accuracy may lead to the failure of experiments. Hence, in this paper, collaborative accuracy of dual-arm manipulators is well defined and fully considered as the objective for calibration. Robustness of the calibration is further guaranteed by minimizing the maximum distance error. The formulated problem is not a typical convex optimization, and gradient search algorithm does not work well for this problem. With researches on optimization moving forward, recent advances in nonlinear optimization are employed to seek for the solution effectively, and it is found that the minimax problem can be approximately linearized to a sequence quadratic programming (SQP) problem. Furthermore, a primal-dual subgradient algorithm is applied for solving the SQP problem with a fast local convergence. Finally, in order to verify the superiority of the proposed method, an experiment is performed on an IRB 14000 manipulator, and corresponding outcomes indicate that the RMS collaborative positioning and the orientation accuracies are significantly improved by 90.60% and 91.42%. To the best of our knowledge, our method has reached the best collaborative accuracy compared with existing works (Wang et al., 2014; Roncone et al., 2014; Motta et al., 2001). (C) 2020 Elsevier Ltd. All rights reserved.

Accuracy Analysis and Calibration of a Special 3-DOF Parallel Mechanism

Robust Kinematic Calibration for Improving Collaboration Accuracy of Dual-Arm Manipulators with Experimental Validation

Calibration of 6-DOF Parallel Mechanism Using Joint Force Sensors

A United Kinematic Calibration Method for a Dual-Machine System

An Improved Kinematic Model for Serial Robot Calibration Based on Local POE Formula Using Position Measurement

Accuracy Analysis and Calibration of Gantry Hybrid Machine Tool

Error Analysis and Calibration of a 4-DOF Parallel Mechanism

Kinematic Calibration and Investigation of the Influence of Universal Joint Errors on Accuracy Improvement for a 3-DOF Parallel Manipulator

A Comparative Study on Kinematic Calibration for a 3-DOF Parallel Manipulator Using the Complete-Minimal, Inverse-Kinematic and Geometric-Constraint Error Models

Kinematic Calibration Of The 3-Dof Parallel Module Of A 5-Axis Hybrid Milling Machine

Kinematic Calibration of Gantry Hybrid Machine Tool Based on Estimation Error and Local Measurement Information

Kinematic Calibration of a 2-DOF Over-Constrained Parallel Manipulator Using Force Data

Kinematic calibration of a 5-DOF double-driven parallel mechanism with sub-closed loop on limbs

Fast Identification Method for Kinematic Parameters of a Planar 2-Dof Parallel Manipulator

Kinematic Calibration and Forecast Error Compensation of A 2-Dof Planar Parallel Manipulator

Kinematic Calibration of a 4PPa-2PaR Parallel Mechanism With Subchains on Limbs

Kinematic Parameters Calibration of Redundant Planar 2-Dof Parallel Manipulator with a New Error Function

A Calibration Method for Overconstrained Spatial Translational Parallel Manipulators

Kinematic Performance and Accuracy Analysis of New Type 3-DOF Parallel Mechanism

Kinematic Calibration of a 3-DOF Parallel Tool Head.

Study Of Error Modeling In Kinematic Calibration Of Parallel Manipulators