Abstract:Reverse engineering technology has been widely recognized as a crucial strategy for innovative design of products. However, currently one of major problems for its application is that huge amounts of digitized points cloud data need to be processed for geometrical surface modelling, especially for unknown free-form surfaces which are widely used in industry fields such as aircraft, automobile, shipbuilding, steam turbine, etc. In order to digitize unknown free-form surfaces accurately and efficiently, an adaptive sampling approach based on advanced path detecting has been presented. The method is characterized by integrating one touch- trigger probe and two laser probes onto the same Z axis of Coordinate Measuring Machine (CMM), and the two laser probes are located on both sides of the touch probe. During sampling, the CMM scans the free-form surface line by line. At the scanning direction, the laser probes are applied to collect the measuring path information in front of the touch probe. And the data acquired by the laser probes is processed and fitted into B-spline curves real-timely, and then the curvature feature of the measuring path is extracted. The obtained path information is used to generate a new measuring path for touch probe to achieve adaptive sampling. While at the cross-section feeding direction, curvature analysis algorithm based on the angle variation between measuring sections is employed to subdivide the cross-sections when needed. Repeating this procedure, the measuring sections will be distributed adaptively. Simulation and experiment results indicate that the sampling points generated by the touch probe are laid out rationally according to the curvature of the surfaces, therefore the sampling efficiency and accuracy can be improved significantly by the proposed approach.

Redundant Manipulator Based Autonomous Scanning for Unknown Variable Cross-Section Pipe

3D Reconstruction of Small-diameter Pipes Inner Surface Based on Structural Light

An Adaptive Sampling Approach for Digitizing Unknown Free-form Surfaces Based on Advanced Path Detecting

Non-contact adaptive sampling for unknown free-form surface based on double-probe integration

Design of Rnd Locating and Scanning Device for Painting Robot Based on Laser Ranging Sensor

A Collision-Free Trajectory Planning Method for Redundant Manipulator Spraying for Inner Surface of Pipe

Design of Weld Inspection System for Intersected Pipe Based on Redundant Manipulator

Research on Snake-Like Robot for Cutter Inspection in Tunnel Boring Machine.

Redundant-robot-based Painting System for Variable Cross-Section S-shape Pipe

An On-Line Path Finding Algorithm in Unknown Duct for Long Redundant Robot with Laser Rangefinder.

Towards a Cooperative Robotic System for Autonomous Pipe Cutting in Nuclear Decommissioning

Model Adaptive Scanning Viewpoint Automatic Planning

Adaptive path planning for the gantry welding robot system

Mechanism and Simulation Analysis of Mechanical Self-adaptive Pipe-Robot

Laser Scanning–based Robot Welding Path Planning for Complex Saddle–shaped Weld Seams

A New Multiple Robot Laser 3D Scanning System

Research on Path Planning Technology of a Line Scanning Measurement Robot Based on the CAD Model

Three-Dimensional-Scanning of Pipe Inner Walls Based on Line Laser

3D reconstruction of complex spatial weld seam for autonomous welding by laser structured light scanning

Scanning method of robot-3D scanner system and its industrial application

Design Method of Modular Units for Articulated in-Pipe Robot Inspecting System