Abstract:Leak detection and water quality monitoring are requirements and challenging tasks in Water Distribution Systems (WDS). In-line robots are designed for this aim. In our previous work, we designed an in-pipe robot [1]. In this research, we present the design of the central processor, characterize and control the robot based on the condition of operation in highly pressurized environment of pipelines with the presence of high-speed flow. To this aim, an extreme operation condition is simulated with computational fluid dynamics (CFD) and the spring mechanism is characterized to ensure sufficient stabilizing force during operation based on the extreme operating condition. Also, an end-to-end method is suggested for power considerations for our robot that calculates minimum battery capacity and operation duration in the extreme operating condition. Finally, we design a novel LQR-PID based controller based on the system’s auxiliary matrices that retains the robot’s stability inside pipeline against disturbances and uncertainties during operation. The ADAMS-MATLAB co-simulation of the robot-controller shows rotational velocity with -4°/sec and +3°/sec margin around x, y, and z axes while the system tracks different desired velocities in pipelines (i.e. 0.12m/s, 0.17m/s, and 0.35m/s). Also, experimental results for four iterations in a 14-inch diameter PVC pipe show that the controller brings initial values of stabilizing states to zero and oscillate around it with a margin of ±2° and the system tracks desired velocities of 0.1m/s, 0.2m/s, 0.3m/s, and 0.35m/s in which makes the robot dexterous in uncertain and highly disturbed environment of pipelines during operation.

Redundant-robot-based Painting System for Variable Cross-Section S-shape Pipe

Design Of Redundant Robot Painting System For Long Non-Regular Duct

An Underwater Robot with Self-Adaption Mechanism for Cleaning Steel Pipes with Variable Diameters

Design of Rnd Locating and Scanning Device for Painting Robot Based on Laser Ranging Sensor

Development of a Pipeline Inspection Robot for the Standard Oil Pipeline of China National Petroleum Corporation

Teleoperated service robotic system for on-site surface rust removal and protection of high-rise exterior gas pipes

A Cleaning Robot for the Pipe Ventilation System of a Central Air-conditioner

Constrained Path Planning on Pipeline Surface for Wall Climbing Robots

Control Strategy of Pipeline Robot

Design and Development of a Deformable In-Pipe Inspection Robot for Various Diameter Pipes

A review on pipeline inspection robot

Experimental Design and Spray Technology Research of Ship Paint Spraying Robot

Development of a 3D Pipe Robot for Smart Sensing and Inspection Using 3D Printing Technology

A Review: Technological Trends and Development Direction of Pipeline Robot Systems

Motion Planning of Redundant Manipulators for Painting Uniform Thick Coating in Irregular Duct

A Collision-Free Trajectory Planning Method for Redundant Manipulator Spraying for Inner Surface of Pipe

Workspace Analysis of a Mobile Robot System for the Ship Section Painting

Design, Characterization, and Control of a Size Adaptable In-pipe Robot for Water Distribution Systems

Building information modeling‐based 3D reconstruction and coverage planning enabled automatic painting of interior walls using a novel painting robot in construction

Path Planning for Spray Painting Robot of Horns Surfaces in Ship Manufacturing

Design of a Robot for Pipeline Weld Quality Inspection