Abstract:Limited available land for livestock farming and increasing land-use costs have forced some large animal feeding operations to build animal barns from conventional one-floor to multi-floor in China recently because multi-floor animal building (MFAB) has a great advantage in saving land utilization. The ventilation system is an important part of animal building determining the indoor environmental condition. The difference in ventilation rate be-tween MFAB and conventional barn might exist, because of the difference in building structure, especially due to the confined space outside of exhaust fans in the MFAB. However, a limited number of studies have accumulated information on the ventilation performance of this novel multi-floor animal barn. This work aims to acquire such information relating to the ventilation performance of a novel MFAB with a different number of floors (6, 7, 8, 9, and10 floors building) and different width of the yard using the Computational Fluid Dynamics (CFD) technique. A field measurement was carried out in a six-floor pig barn, and the measured air velocities were used for the CFD model validation. The validated CFD model was then extended to explore the difference of airflow patterns and ventilation rates on different floors under a different number of floors and the width of the yard. The simulation results showed that the difference in airflow pattern among each floor was limited, but the ventilation rate of each floor varied from floor to floor under the studied type of MFAB. The ventilation rate on the first floor was the lowest and increased with the floor increasing. Hence, more focus on the ventilation rate of the first floor should be paid during the design procedure. The increase of the floor number negatively affected the perfor-mance of the ventilation system because of the pressure profile in the yard of the building. Increasing the width of the yard could mitigate the negative effect of the floor number on the ventilation rates. Therefore, to perform the desired ventilation rate for animals in a multi-floor animal building required a more detailed design of the ventilation system of each floor by considering either the space available after exhaust openings or additional fans.

Evaluation of Turbulence Models to Predict Airflow and Ammonia Concentrations in a Scale Model Swine Building Enclosure

Numerical Simulation of a Turbulence Flow in the Cut-off Valve by RNG k- ε Turbulence Model

AMMONIA DISPERSION FROM MULTI-FLOOR VERSUS STANDARD SINGLE-FLOOR PIG PRODUCTION FACILITIES BASED ON COMPUTATIONAL FLUID DYNAMICS SIMULATIONS

AN EXTENDED K-Ε MODEL FOR NUMERICAL SIMULATION OF WIND FLOW AROUND BUILDINGS

Assessment of Turbulence Models and Air Supply Opening Models for CFD Modelling of Airflow and Gaseous Contaminant Distributions in Aircraft Cabins

Appropriate CFD Turbulence Model for Improving Indoor Air Quality of Ventilated Spaces

Comparison of different methods for estimating ventilation rates through wind driven ventilated buildings

Influence of Turbulence Models on the Numerical Prediction of Flow in an Industrial Gas Turbine Intake System

Comparison of different turbulence models in computation of co-axial jet stream of Texaco gasifier

Influence of the turbulence model on the numerical predictions of cold turbulent flow in a heavy-duty gas turbine DLN combustor

Developing modified k–ε turbulence models for neutral atmospheric boundary layer flow simulation using OpenFOAM

Numerical Evaluation On Ventilation Rates Of A Novel Multi-Floor Pig Building Using Computational Fluid Dynamics

Evaluation of fast fluid dynamics with different turbulence models for predicting outdoor airflow and pollutant dispersion

Study on convective heat transfer from pig models by CFD in a virtual wind tunnel

Numerical Simulation Of Natural Ventilation In Typical Piggery Of South-East China

Performance assessment of turbulence models in CFX for predicting heat transfer of supercritical water

Comparison study of turbulence models in numerical simulation of multi-jets impinging injectors

Numerical study on turbulence separated flow in fine coal ring-shaped pipe separator with RNG k-ε model and standard k-ε model

Application of different turbulence models in numerical simulation of mixed-flow pump and its evaluation

Evaluation of a micro-scale wind model’s performance over realistic building clusters using wind tunnel experiments

PERFORMANCE ASSESSMENT OF THE RANS TURBULENCE MODELS IN PREDICTION OF AERODYNAMIC NOISE FOR AIR-CONDITIONER INDOOR UNIT