Abstract:MSn 5 (M=Fe, Co, Fe 0.5 Co 0.5 ) are a series of metastable tin-based alloys discovered by Han’s group. Because of the high Sn content and high conductivity of alloying metals (Fe and Co et. al), the MSn 5 phases exhibit superior electrochemical properties in lithium ion batteries. For example, 30-50 nm FeSn 5 nanospheres can deliver a high capacity of 750 mA h g -1 at 50 mA g -1 , and CoSn 5 nanospheres exhibit good cycle stability up to 100 cycles. Although these three transition metals Fe, Co, and Ni show similar physical and chemical properties, we fail to synthesize NiSn 5 phase by using the same polyol wet chemical method. In this work, we firstly synthesized the new NiSn 5 intermetallic phase by adopting an induction synthesis method using Fe 3+ and/or Co 2+ as induction agent. Furthermore, the crystal structure was resolved using the charge-flipping method, and the growth and electrochemical mechanism were investigated using TEM and ex situ synchrotron XRD. The resutl shows the NiSn 5 phase belongs to tetragonal phase in P4/mcc space group, and has stoichiometric Ni atom defects, the actual chemical formula is Ni 0.62 Sn 5 . Growth mechanism study reveals that the FeSn 5 /CoSn 5 seed crystal formed after addition of trace of Fe 3+ /Co 2+ plays a vital role in the formation of NiSn 5 phase. The existence of FeSn 5 /CoSn 5 seed crystal can effectively reduced the nucleation barrier of NiSn 5 , and the NiSn 5 nanospheres final form through Kirkendall diffusion. The phase evolution investigation reveals that the NiSn 5 phase is irreversible after initial discharging/charging processes, unlike the reversible transformation of MSn 5 (M=Fe, Co, Fe 0.5 Co 0.5 ). This result accounts for the failure of NiSn 5 synthesis using traditional polyol wet chemical method and the relatively low cyclability of NiSn 5 . We believe this method can be expanded to synthesize other new alloys which are difficult to produce using the traditional methods. Figure 1 (a) The reaction mechanism of induced synthesis of NiSn 5 phase. (b) Synchrotron XRD pattern and Rietveld refinement of NiSn 5 phase. (c,d) TEM images of Sn and NiSn 5 nanospheres. Acknowledgments This work is supported by the National Natural Science Foundation of China (Grant No. 51901206). Figure 1

Enhanced Ni3Sn4 Nucleation and Suppression of Metastable NiSn3 in the Solid State Interfacial Reactions Between Sn and Cone-Structured Ni

Effects of Ni on the nucleation and growth behavior of Cu6Sn5 in Sn–8.5Cu alloy: An in situ observation

Co-precipitated Ni/Mn Shell Coated Nano Cu-rich Core Structure: A Phase-Field Study

Interfacial Reactions in the Sn-(Cu)/Ni, Sn-(Ni)/Cu, and Sn/(Cu,Ni) Systems

A New Intermetallic NiSn 5 Phase: Induced Synthesis, Crystal Structure Resolution, and Investigation of Its Mechanism.

The Formation Mechanism of Anomalous Eutectic in Highly Undercooled Ni-Sn Eutectic Alloy

Low-Temperature Solid State Bonding of Sn and Nickel Micro Cones for Micro Interconnection

Induced Synthesis of a New Intermetallic NiSn5 Phase and Electrochemical Mechanism Investigation

Analysis on phase nucleation in Sn-Ni peritectic alloy combining confocal laser scanning in-situ observation and differential scanning calorimetry

Effect of Ni on growth kinetics, microstructural evolution and crystal structure in the Cu(Ni)–Sn system

Solidification behavior of Sn crystals − Under different temperature gradients

Nanoscale chemistry and atomic-scale microstructure of a bulk Ni3Sn material built using selective laser melting of elemental powder blends

Microstructure and phase transformation of TiNi alloy with addition of third element Sn

Electromigration effects upon the low-temperature Sn/Ni interfacial reactions

Interfacial Reactions in the Sn–20 At.% In/Cu and Sn–20 At.% In/Ni Couples at 160 °C

Study of Diffusion Mechanism in Low-Temperature Bonding Method Based on Surface Cu Microcones

On Melt Concentration at the Solid/liquid Interface During Preparation of Directionally Solidified Sn–36 At.%ni Peritectic Alloy

Phase Equilibria of Sn-Co-Ni System and Interfacial Reactions in Sn/(Co, Ni) Couples

Effect of Ni Content on Microstructure and Characterization of Cu-Ni-Sn Alloys

Mechanism of Anomalous Eutectic Formation in the Solidification of Undercooled Ni–Sn Eutectic Alloy

Solid state diffusion between Sn and Cu microcones on Cu microcones