Abstract:Layered Li2MnO3 center dot 3LiNi(0.5-x)Mn(0.5-x)Co(2x)O(2) (x = 0, 0.05, 0.1, 0.165) microspheres with Mn-rich core were successfully synthesized by a simple two-step precipitation calcination method and intensively evaluated as cathode materials for lithium ion batteries. The X-ray powder diffractometry (XRD) results indicate that the growth of Li2MnO3-like regions is impeded due to the presence of cobalt (Co) in the material. The field-emission scanning electron microscopy (FESEM) data reveal the core-shell-like structure with a Mn-rich core in the as-prepared particles. The charge-discharge testing reveals that the capacity is markedly improved by adding Co. The activation of the cathode after Co doping becomes easier and can be accomplished completely when charged to 4.6 V at the C/40 rate in the initial cycle. Superior electrochemical performances are obtained for samples with x = 0.05 and 0.1. The corresponding initial discharge capacities are separately 281 and 285 mA h g(-1) at C/40 between 2 and 4.6 V at room temperature. After 250 cycles at C/2, the respective capacity retentions are 71.2% and 70.4%, which are better compared to the normal Li-excess Li2MnO3 center dot 3LiNi(0.4)Mn(0.4)Co(0.2)O(2) sample with a uniform distribution of Mn element in the particles. The initial discharge capacities of both samples are approximately 250 mA h g(-1) at a rate of C/2 between 2 and 4.6 V at 55 degrees C after activation. Furthermore, the samples are investigated by electrochemical impedance spectroscopy (EIS) at room and elevated temperature, revealing that the key factor affecting electrochemical performance is the charge transfer resistance in the particles.

Electrochemical performance of LiMn 2 O 4 microcubes prepared by a self-templating route

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

Construction of LiMn2O4 Microcubes and Spheres Via the Control of the (104) Crystal Planes of MnCO3 for High Rate Li-ions Batteries

Strategic Design of Lithium-Rich Hierarchical Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 Microcubes as High-Capacity Cathodes for Lithium-Ion Batteries

Preparation of porous Li1.2Mn0.54Ni0.13Co0.13O2 micro-cubes for high-capacity lithium-ion batteries

Hollow porous LiMn 2O 4 microcubes as rechargeable lithium battery cathode with high electrochemical performance

High-performance Hierarchical LiNi1/3Mn1/3Co1/3O2 Microspheres Synthesized Via a Facile Template-Sacrificial Route

Manganous Oxide-Cobalt@carbon Microcubes with a Hierarchical Mesoporous Structure for High Performance Lithium Storage

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

Synthesis and Electrochemical Performance of Core-Shell Structured LiNi0.5Mn1.5O4 Microspheres for Lithium Ion Batteries

Uniform LiNi1/3Co1/3Mn1/3O2 hollow microspheres: Designed synthesis, topotactical structural transformation and their enhanced electrochemical performance

Porous LiMn2O4 Microspheres As Durable High Power Cathode Materials for Lithium Ion Batteries

Facile fabrication of Fe0.8Mn1.2O3 with various nanostructures for high-performance lithium-ion batteries

Low-cost and eco-friendly synthesis of octahedral LiMn2O4 cathode material with excellent electrochemical performance

Nanoparticles-Assembly Of Limn2o4 Hollow Microspheres With Improved Rate Capability And Cycleability For Lithium Ion Batteries

LiMn2O4 Microspheres Secondary Structure of Nanoparticles/plates As Cathodes for Li-ion Batteries

Self-templating synthesis of single crystalline LiNi0.5Mn1.5O4 nanotubes with improved electrochemical performance

One‐Pot Hydrothermal Synthesis of FeMoO4 Nanocubes as an Anode Material for Lithium‐Ion Batteries with Excellent Electrochemical Performance

Hollow Li1.2Mn0.5Co0.25Ni0.05O2 Microcube Prepared by Binary Template As a Cathode Material for Lithium Ion Batteries

Facile Fabrication of Hierarchical LiMnPO4 Microspheres for High-Performance Lithium-Ion Batteries Cathode

Layered Li2MnO3·3LiNi0.5−xMn0.5−xCo2xO2 Microspheres with Mn-rich Cores As High Performance Cathode Materials for Lithium Ion Batteries