Abstract:High-performance lithium-rich-layered oxide is regarded as a promising candidate for lithium-ion battery (LIB) cathode materials because of its outstanding high specific capacity. Despite in-depth research over the past decade, there are still a number of serious problems limiting its commercialization. Here, we report a simple morphological design and size-controllable material preparation strategy to enhance the electrochemical performance of LIB cathode materials. We use a simple solvothermal method to obtain a carbonate precursor material with different morphologies by adjusting the solvent ratio of the system, which will be conveniently formed into Li1.2Mn0.54Ni0.13Co0.13O2 by calcination. Moreover, further relation between the morphology and electrochemical performance of cathode materials is systematically investigated. The microsphere cathode material with suitable size exhibits superior electrochemical performances among all samples in terms of initial reversible capacity (280.4 mA h g–1 at 0.1 C) and cycle performance (87.67% retention after 200 cycles at 1 C). Even at 5 C, a high discharge capacity of 150.8 mA h g–1 can be obtained. In addition, this work provides a feasible and effective approach to controllable synthesis of stable structures and high-performance oxide electrode materials for LIBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16755?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16755</a>.Internal morphology of secondary microparticle; XRD pattern of all carbonate precursors; EDX analysis of final products for samples LR-0, LR-4, and LR-6; comparison of mean size and tap density for all samples; SEM image and EDS mapping of Mn, Co, and Ni elements for LR-0, LR-2, LR-4, and LR-6 precursors; SEM images of the electrode after 100 cycles at 1 C; SEM images of pristine electrodes and cycled electrodes; and charge/discharge curves for the electrode (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16755/suppl_file/am0c16755_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Hollow Li1.2Mn0.5Co0.25Ni0.05O2 Microcube Prepared by Binary Template As a Cathode Material for Lithium Ion Batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Hollow porous LiMn 2O 4 microcubes as rechargeable lithium battery cathode with high electrochemical performance

Synthesis and Electrochemical Characteristics of Li₁.₂(Ni₀.₂Mn₀.₆)ₓ(Co₀.₄Mn₀.₄)y(Ni₀.₄Mn₀.₄)₁₋ₓ₋yO₂ (0 ≤ X + Y ≤ 1) Cathode Materials for Lithium Ion Batteries

Uniform LiNi1/3Co1/3Mn1/3O2 hollow microspheres: Designed synthesis, topotactical structural transformation and their enhanced electrochemical performance

An Ingenious Design of Lamellar Li1.2Mn0.54Ni0.13Co0.13O2 Hollow Nanosphere Cathode for Advanced Lithium-Ion Batteries

Preparation of porous Li1.2Mn0.54Ni0.13Co0.13O2 micro-cubes for high-capacity lithium-ion batteries

Hollow 0.3li(2)Mno(3)Center Dot 0.7lini(0.5)Mn(0.5)O(2) Microspheres As A High-Performance Cathode Material For Lithium-Ion Batteries

Strategic Design of Lithium-Rich Hierarchical Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 Microcubes as High-Capacity Cathodes for Lithium-Ion Batteries

Hierarchical Hollow Microcuboid LiNi0.5Mn1.5O4 As Cathode Material with Excellent Rate and Cycling Performance for Lithium-Ion Batteries

Simple Glycerol-Assisted and Morphology-Controllable Solvothermal Synthesis of Lithium-Ion Battery-Layered Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 Cathode Materials

Manganous Oxide-Cobalt@carbon Microcubes with a Hierarchical Mesoporous Structure for High Performance Lithium Storage

Well-ordered layered LiNi0.8Co0.1Mn0.1O2 submicron sphere with fast electrochemical kinetics for cathodic lithium storage

Dandelion-like Mn/Ni Co-doped CoO/C Hollow Microspheres with Oxygen Vacancies for Advanced Lithium Storage

Well-ordered Layered LiNi 0.8 Co 0.1 Mn 0.1 O 2 Submicron Sphere with Fast Electrochemical Kinetics for Cathodic Lithium Storage

Micron-Sized Monodisperse Particle LiNi0.6Co0.2Mn0.2O2 Derived by Oxalate Solvothermal Process Combined with Calcination as Cathode Material for Lithium-Ion Batteries

A facile route to synthesize multiporous MnCo2O4 and CoMn2O4 spinel quasi-hollow spheres with improved lithium storage properties.

Multishelled Ni X Co3- X O4 Hollow Microspheres Derived from Bimetal-Organic Frameworks As Anode Materials for High-Performance Lithium-Ion Batteries

Hollow porous bowl-shaped lithium-rich cathode material for lithium-ion batteries with exceptional rate capability and stability

Double-shelled CoMn 2O 4 hollow microcubes as high-capacity anodes for lithium-ion batteries

A Bubble-Template Approach for Assembling Ni-Co Oxide Hollow Microspheres with an Enhanced Electrochemical Performance As an Anode for Lithium Ion Batteries.