Abstract:Deposition of granular materials into a container is a general industrial packing process. In this study, the deposition behaviour of dilute granular mixtures consisting of two types of particles that were of the same particle size but different particle densities in the presence of air was numerically analyzed using a coupled discrete element method (DEM) and computational fluid dynamics (CFD). Bilayer granular mixtures with light particles at bottom and heavy particles at top were first simulated. It was found that the presence of air significantly affected the flow behaviour of the bilayer mixtures. For the system with a relatively low initial void fraction, the air entrapped inside the container escaped through the dilated zones induced due to the friction between the powder bed and wall surfaces. The escaping air streams entrained light particles that were originally located at the bottom of the granular system. Consequently, these light particles were migrated to the top of the granular bed at the end of deposition process. More light particles were migrated when the deposition distance was increased. For the system with a high initial void fraction, some light particles penetrated into the top layer of heavy particles and created a mixing zone. Deposition of random mixtures with different initial void fractions was also investigated and the influence of initial void fraction on the segregation behaviour was explored as well. It was found that the increase of void fraction promoted segregation during the deposition in air. It was demonstrated that, for granular mixtures consisting of particles of different air sensitivities, the presence of air had a significant impact on the mixing and segregation behaviour during the deposition.

Bulk Density of Polymer Solid Granules in Vane Cylinder

Dynamic Densification of Wet Granular Materials in Continuous Dense Flows under Gravity

DEM simulation OF A single SCREW GRANULATOR: THE EFFECT OF LIQUID BINDER ON GRANULE PROPERTIES

DEM/CFD Modelling of the Deposition of Dilute Granular Systems in a Vertical Container

Modeling of Effective Crosslinking Density of the Gel in Free-Radical Copolymerization of Vinyl/divinyl Monomers

Packing of Cylindrical Particles: DEM Simulations and Experimental Measurements

Effect of Fiber Packing Density on Performance and Mass Transfer of Hollow Fiber Membrane Contactor

Experimental Study on the Influence Factors of Plug Pneumatic Transport of Polypropylene Granule

Research on bulk prepolymerization dynamics and granulation process of vinyl chloride

A Study of Concentrated Suspensions in Polyethylene Melts and the Impact on Viscosity and Polymer Processing Operations

Tuning the bulk properties of bidisperse granular mixtures by small amount of fines

Morphology and structure characterization of hollow granule mold powder for continuous casting

Microstructural Modeling for Elastic Moduli of Bonded Granules

Mechanistic understanding of the effects of process and design parameters on the mixing dynamics in continuous twin-screw granulation

Characterization of Polymer Materials Using Magnetic Levitation

Effect of polymer granules on the electrostatic behavior in gas-solid fluidized beds

A Discrete Packing Model of Granular Material Confined in A Vertical Column

Investigation of mixing homogeneity of binary particle systems in high-shear wet granulator by DEM

Particle dynamics simulation of wet granulation in a rotating drum

Using a material database and data fusion method to accelerate the process model development of high shear wet granulation

Density Measurement for Polymers by Magneto-Archimedes Levitation: Simulation and Experiments