Abstract:As the essential component of a quantum dot-sensitized solar cell (QDSC), the counter electrode (CE) plays an important role in electron transfer and catalytic reduction acquisition throughout the device. A novel route to design multilayer functionalized Cu2S thin films as CEs with high catalytic activity and enhanced stability, as well as large specific surface area and high conductivity, is presented. Firstly, Mo-based films were prepared by magnetron sputtering on a glass substrate, and then porous CuZnMo conductive films were formed by etching with hydrochloric acid. Secondly, indium tin oxide (ITO) film was sputtered onto the porous structure to act as a protective layer, and a porous ITO/CuZnMo structured film was obtained after optimization. In the third step, multilayer Cu(x)/ITO/CuZnMo structured films were acquired by sputtering Cu films. Finally, multilayer Cu2S(t)/ITO/CuZnMo functionalized film CEs were obtained via in situ sulfidation of sputtered Cu films. The functions of conduction and resistance to electrolyte corrosion were produced and enhanced by annealing an ITO layer at high temperature prior to Cu deposition, while catalytic activity enabled by Cu2S was realized from Cu film sulfidation. The multilayer Cu2S/ITO(500 °C)/CuZnMo functionalized films exhibit high catalytic activity and enhanced stability for resistance to electrolyte corrosion. Taking multilayer Cu2S/ITO(500 °C)/CuZnMo films as CEs, the QDSCs demonstrated good stability of power conversion efficiency (PCE) after 500 h of irradiation, from an initial 4.21% to a final 4.00%. Furthermore, the thickness of Cu2S film modulated by the duration of Cu sputtering was investigated. It was found that the QDSCs using multilayer Cu2S(40 min)/ITO/CuZnMo functionalized film with a Cu2S thickness of 1.2 μm as CE exhibit the best performance, and the R ct value was 0.57 Ω. The best photovoltaic performance with a PCE of 5.21% (V oc = 533.1 mV, J sc = 18.80 mA cm-2, FF = 52.84%) was achieved under AM 1.5 radiation with an incident power of 100 mW cm-2. This design of a multilayer functionalized CE introduces potential alternatives to the common brass-based CE for long-term QDSCs with high performance.

Improving the Efficiency of Quantum Dots Sensitized Solar Cell by Using Pt Counter Electrode

Octahedron Shaped Lead Sulfide Nanocrystals As Counter Electrodes for Quantum Dot Sensitized Solar Cells

Antimony tin oxide/lead selenide composite as efficient counter electrode material for quantum dot-sensitized solar cells

Zeolitic-imidazolate frameworks derived Pt-free counter electrodes for high-performance quantum dot-sensitized solar cells

CdSe Quantum Dots Sensitized Mesoporous TiO2Solar Cells with CuSCN As Solid-State Electrolyte

Graphene Quantum Dots Assisted Photovoltage and Efficiency Enhancement in Cdse Quantum Dot Sensitized Solar Cells

ATO/CuS composite counter electrodes enhanced the photovoltaic performance of quantum dot sensitized solar cells

Surface modification of platinum counter electrode by amino quinonoid zwitterion to improve the performance of dye-sensitized solar cells

One-Step Electrochemical Deposition of Hierarchical Cus Nanostructures on Conductive Substrates As Robust, High-Performance Counter Electrodes for Quantum-Dot-Sensitized Solar Cells

A Free Radical Assisted Strategy For Preparing Ultra-Small Pt Decorated Cnts As A Highly Efficient Counter Electrode For Dye-Sensitized Solar Cells

A Novel High-Performance Counter Electrode for Dye-Sensitized Solar Cells

A novel strategy to design a multilayer functionalized Cu2S thin film counter electrode with enhanced catalytic activity and stability for quantum dot sensitized solar cells

Polyoxometalate-Modified Ternary Copper-Tungsten-Sulfide Nanocrystals as High- Performance Counter Electrode Materials for Quantum Dots-Sensitized Solar Cells

High‐performance Counter Electrode Based on Nitrogen‐doped Porous Carbon Nanoribbons for Quantum Dot‐sensitized Solar Cells

Conductive carbon black/CuS composite counter electrode for the enhanced photovoltaic performance of CdS quantum dot sensitized solar cells

Improvement on the Catalytic Activity of the Flexible PEDOT Counter Electrode in Dye-Sensitized Solar Cells

Multifunctional conjugated molecules combined with electrospun CuCoP/carbon nanofibers as a modifier of Pt counter electrode for dye-sensitized solar cells

In situ sulfidation of porous sponge-like CuO/SiW 11 Co into Cu 2 S/SiW 11 Co as stabilized and efficient counter electrode for quantum dot-sensitized solar cells

Recent Progresses in Quantum‐Dot‐Sensitized Solar Cells: The Role of Counter Electrodes

Properties of an Au/Pt bilayered counter electrode in dye sensitized solar cells

Selenylation to charge transfer improvement at the counter electrode (CE)/electrolyte interface for nanocrystalline Cu1.8S1- xSex CEs